Viewing Teletext; Watching Video Or Dvds - JVC 0509GLT-NF-MT Instructions Manual

Viewing Teletext

This TV can display TV broadcasts and Teletext on the same channel in
two windows.
1.
When watching TV TV
2.
Select a Teletext page by pressing number button (0-9)
• Move up or down a page by
Holds the current page.
Hold
• Cancels by pressing this button again.
Size Doubles the size of the displayed text.
Returns to page "100" or a previously
Index
designated page.
Displays, and/or changes the number of Sub-
Sub-page
page.
• Cancel by press this button again.
Displays hidden information
Reveal
• Example : answer to a quiz, etc.
12
TEXT TEXT

Watching Video or DVDs

Select the input Source.
• Operate the connected device and play video.
1.
Select "Set Up"
2.
Select item
Switch between video and component signal
Video - 1 Setting
(Video / Component)
HDMI Setting
Setting for HDMI input
Size : Normally set to "Auto." If wrong screen size
appears in 480p (525p), change to "1" or "2"
Audio : Normally set to "Auto." If no sound, change to
"Analogue" or "Digital."
Mode : If no picture, change to "1" or "2".
PC Setting Setting for PC input
PC Setting
>
PC Position
>
Phase
Pixel
PC Position :
Phase : Sets the focus of screen.
Pixel :
Adjusts the horizontal feature of screen.
Note: TV/VIDEO
1. Select
button select the
video source by
move down or
use button 0-6 for
2. Set
selection.
1. Select
2. Enter
1. Select item
2. Setting or Adjust
3. Set
1. Select PC 1. Adjust
Position
2. Enter 2. Set
Adjusts screen position.