Getting Started; The Remote Control - JVC 0207TNH-II-IM User Manual

Quick Setup

Getting Started

These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. If you have questions, or for more detailed
information on any of these steps, please consult other sections of this manual.
Step 1 – The Remote Control
Before you can operate your remote control, you first need to
install the batteries (included).
Raise the latch on the remote's back cover to remove. Insert
two batteries, carefully noting the "+" and "–" markings, and
place the "–" end in the remote first. Snap the cover back into
place.
Basic Operation
Turn the television on and off by pressing the P
corner of the remote. If this is the first time you are turning on the TV, the
interactive plug-in menu appears.
Using Menu Buttons
To use the menu functions, press the M
select a menu using the four arrow keys. The four arrow keys
are used only for menu selections.
12
button at the top right
OWER
button. Next,
ENU
POWER
MENU BACK
OK