Use these buttons to raise or lower the TV's volume level. The maximum is the level you set in
Volume Limit. See page 51.
The Return+/TV button has two functions:
Return - Returns to the channel viewed just before the channel currently onscreen.
Return+ - Lets you program a specific channel to return to while scanning through the
channels using the CH+ and CH– buttons.
TV - Returns to the TV mode.
Press the R
The channel currently active has been programmed as your return+ channel. Now scan
Press the R
• To cancel your return+ channel, press and hold the R
The message "Return Channel Cancelled !" will appear.
• Return+ works only with the C
By pressing the S
Smart Sound on or off.
A.H.S. - Adds a more spacious surround sound. Music gives basic effect and movie for more
Smart Sound - Decreases high sound levels, giving a regulated sound level.
Press the S
To select "A.H.S." or "Smart Sound"
To choose the setting
Press the M
• Smart Sound may become an unnatural effect, depending on the signal source.
button instantly turns the volume down completely when you press it. Press
and the volume level will instantly go to zero. To restore the volume to its previous
level, press M
+/TV and hold for three seconds
Return Channel (123-456)
through the channels using the C
You will return to your programmed channel.
+/- buttons. Pressing any number key will cancel
button, you can change the A.H.S. (Advanced Hyper Surround) and
+/TV button for three seconds.