JVC ShowView LPT0923-001A Instructions Manual page 33

Dvd & hdd video recorder
Table of Contents

Advertisement

Setting The Progressive Mode
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select "
window appears under the selected item.
TITLE 99
TRACK 99
DVD-
VIDEO
3
Press rt to select the desired option, then press ENTER.
AUTO 1
: Used to play a disc containing both video and film source
materials. This system recognizes the source type (video or film)
of the current disc according to the disc information. Normally
select this option.
AUTO 2
: Almost the same as the "AUTO 1", but the processing of
the scenes with movement is different. Select "AUTO 1" or
"AUTO 2" to your preference.
FILM
: Suitable for playing back a progressive scanned film source
disc.
VIDEO
: Suitable for playing back a video source disc. The outlines
on the played back pictures will be soft.
To clear the on-screen bar
Press ON SCREEN.
NOTE:
When the progressive mode is set, be sure to set "L-1 OUTPUT" to
"COMPONENT". (
pg. 61) Progressive scan is output only from
COMPONENT VIDEO OUT connector.
Programme Playback
You can programme up to 30 tracks (Video CD/SVCD or Audio CD)
to play back in the desired order.
While stopped
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select "PRGM", then press ENTER. The
programme table appears under on-screen bar.
TRACK 99
VCD
3
Press the number keys to
enter the track numbers in the
desired order.
Examples:
A To select track 5, press the
number key "5" and ENTER.
B To select track 15, press the
number key "1" and "5".
C To select track 25, press the number key "2" and "5".
If you have specified a wrong selection
Press CANCEL (&). The last selection is erased.
Or press CLEAR (8). The whole selection is erased.
", then press ENTER. The pop-up
EACH 0:00
3D-ON
CINEMA AUTO 1
EACH 0:00
4
Press 4. Playback starts in the programmed order.
When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
To add tracks to the end of the programme, perform steps 1 through
3.
During Programme Playback, pressing 6 skips to the next
selection of the programme. Pressing 2 returns to the beginning of
the current selection.
To clear the on-screen bar and the contents of the programme
Press ON SCREEN.
To cancel Programme Playback
Press w e to select "PRGM", then press ENTER.
NOTE:
Programme Playback is not possible depending on the type of disc.
Random Playback
You can play back all the tracks on the disc in random order.
While stopped
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select "RND", then press ENTER. Playback starts
in random order.
VCD
To clear the on-screen bar
Press ON SCREEN.
To cancel Random Playback
Perform steps 1 and 2.
NOTE:
The same track will not be played back more than once during Random
Playback.
Select The Switching Interval Of The Slide Show
You can control the switching interval of the slide show.
1
Press ON SCREEN twice to access the on-screen bar.
2
Press w e to select "
window appears under the selected item.
CINEMA
GROUP 99
R
3
Press rt to select the desired option, then press ENTER.
Each time you press rt, the interval changes as follows:
5 SEC. { 10 SEC. { 15 SEC. { 20 SEC. { 25 SEC. {
30 SEC. { (Back to the beginning)
To clear the on-screen bar
Press ON SCREEN.
BASIC OPERATIONS ON DVD DECK
TRACK 99
EACH 0:00
", then press ENTER. The pop-up
TRACK 99
EACH 179:59
5 SEC.
33
EN
CINEMA
CINEMA

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents