Specifications - JVC LVT2016-001D Instructions Manual

DVD Specifications
Laser system
Frequency response
Signal-to-noise ratio
Harmonic distortion
Dynamic range
Inputs
ANTENNA IN
VIDEO IN (AV1,2)
AUDIO IN (AV1,2)
DV IN
Outputs
VIDEO OUTPUT
S-VIDEO OUTPUT
COMPONENT OUTPUT
HDMI video/audio output
Audio output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
Accessory:
Video cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
RF 75-ohm Coaxial Cable . . . . . . . . . . . . . . . . .1
Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Semiconductor laser, wavelength 650 nm
DVD (PCM 48 kHz): 8 Hz to 22 kHz, CD: 8 Hz to 20 kHz
More than 95dB
Less than 0.008%
More than 90 dB
Antenna or CATV input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2
- 6.0 dBm more than 47 kohms, RCA jack (L, R) x 2
4 pin (IEEE 1394 standard)
1 Vp-p 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C) 0.286 V (p-p) 75 Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(P )/(P ) 0.7 V (p-p), 75 Ω, RCA jack x 2
B R
SD OUTPUT only
19 pin (HDMI standard, Type A)
HD resolutions only provide up converted SD
0.5 V (p-p), 75 Ω, RCA jack x 1
Optical connector x 1
1 kHz, -6 dBm, 600 Ω, RCA jack (L, R) x 2
Audio cable (L, R) . . . . . . . . . . . . . . . .1
Remote Control . . . . . . . . . . . . . . . . . .1
Design and specifications are subject to change without notice.
53