Recording From External Components - JVC LVT2016-001D Instructions Manual

Recording from External
Recording from External
Components
Components
You can record from an external component, such as
a camcorder or VCR, connected to any of the
Recorder's external inputs.
1. Make sure that the component you want to record
from is connected properly to the Recorder. See
page 14.
2. Press AUX repeatedly to select the external input
to record from.
• AV1: Audio/Video Input mounted on back
panel.
• AV2: Audio/Video Input mounted on front
panel.
• DV: DV Input mounted on front panel.
3. Load a recordable disc or tape.
4. Set a recording mode as necessary by pressing
REC MODE repeatedly.
DVD: XP, SP, LP or EP.
VCR: SP or SLP
5. Press z REC once to start recording.
The REC indicator lights in the display window.
6. Press STOP (x) to stop recording.
Notes:
Check that the Audio In settings DV Record Audio
•
are as you want them. See page 20.
If your source is copy-protected using
•
CopyGuard, you will not be able to record it using
this recorder. See Copyright on page 5 for more
details.
Recording continues until you press STOP (x) or
•
the disc is full.
To record for a fixed length of time, see [Instant
•
Timer Recording] on page 34.
When unit is on any external inputs mode (AV1,
•
AV2 and DV) the CH +/- buttons don't work, press
AUX (on remote) repeatedly to select the TV
mode, and then select the TV channels.
38