Husqvarna 555 XP Workshop Manual page 36

Repair Instructions
Dismantling the carburettor
1
Dismantle the cylinder cover and the air filter.
2
Loosen the screws, F. Unhook the rubber attach-
ment G on both sides. See Figure 35.
3
Loosen the suction hose A, the return hose B, and
the tank bleeding hose C. See figure 34.
4
Remove the air filter holder. Let the air filter holder
remain in place in the cabling for the stop button.
Loosen the fuel hose, D. Unhook the throttle cable,
E. See figure 34.
5
NOTE! Press down the lug to release the carburet-
tor. Lift out the carburettor. See figure 36.
NOTE!
The lug on the carburettor is securely
attached to the partition wall.
6
Use a small flat screwdriver to snap open the con-
nector from the black attachment. Separate the
connector by pressing down the catch with a flat
screwdriver and then pulling the unit apart. See
figure 37.
36
- English
Fig 34
Fig 35
Fig 36
Fig 37
D
E