Programme Playback - JVC 0504CSH-ID-VT Instructions Manual

Examples:
To select track 5, press the number key "5".
To select track 15, press the number key "1" and "5".
To select track 25, press number key "2" and "5".
● It is not possible to use the number key "+10".
If you have specified a wrong selection
Enter the appropriate number keys again.
To clear the on-screen bar
Press PLAY SETUP.
NOTES:
● When "X" is displayed on the TV screen in step C, the
chapter you have selected is not contained in the disc, or
chapter search does not work on the disc.
● Chapter Search starts automatically when you select the
desired chapter in step C depending on the disc.

Programme Playback

You can play back up to 99 tracks in the desired order.
A
Access the on-screen bar.
Press PLAY SETUP twice in stop mode.
B
Select the menu item.
Press w e to move H to
● The programme table appears under the on-screen bar.
C
Select the tracks in the desired order.
Press the appropriate
number keys to select the
tracks.
Examples:
● To select track 5, press the number key "5".
● To select track 15, press the number key "+10" and "5".
● To select track 25, press number key "+10" twice, then
"5".
If you have specified a wrong selection
Press 8. The last selection programmed is erased.
, then press OK.
Programme time
D
Start playback.
Press 4. Playback starts in the selected order.
● When all of the programmed tracks have been played back,
Programme Playback stops, but the programmed information
remains.
● To stop Programme Playback, press 8.
● To clear all the programmed tracks, press 8 to stop playback
and press PLAY SETUP to clear the programme table, then
press 8 again.
● During Programme Playback, pressing 6 skips to the next
selection of the programme. Pressing 2 returns to the
beginning of the current selection.
To clear the programme table
Press PLAY SETUP.
NOTE:
Programme Playback may not be possible depending on the type
of disc.
39
EN