Declaration Of Conformity - MC PCI-DIO48H User Manual

Declaration of Conformity

Manufacturer:
Address:
Category:
Measurement Computing Corporation declares under sole responsibility that the product
to which this declaration relates is in conformity with the relevant provisions of the following standards or other
documents:
EC EMC Directive 2004/108/EC: General Requirements, EN 61326-1:2006 (IEC 61326-1:2005).
Emissions:

EN 55011 (2007) / CISPR 11(2003): Radiated emissions: Group 1, Class A

EN 55011 (2007) / CISPR 11(2003): Conducted emissions: Group 1, Class A
Immunity: EN 61326-1:2006, Table 3.

IEC 61000-4-2 (2001): Electrostatic Discharge immunity.

IEC 61000-4-3 (2002): Radiated Electromagnetic Field immunity.

IEC 61000-4-4 (2004): Electric Fast Transient Burst Immunity.

IEC 61000-4-5 (2001): Surge Immunity.

IEC 61000-4-6 (2003): Radio Frequency Common Mode Immunity.

IEC 61000-4-11 (2004): Voltage Interrupts.
To maintain compliance to the standards of this declaration, the following conditions must be met.

The host computer, peripheral equipment, power sources, and expansion hardware must be CE
compliant.

All I/O cables must be shielded, with the shields connected to ground.

I/O cables must be less than 3 meters (9.75 feet) in length.

The host computer must be properly grounded.

Equipment must be operated in a controlled electromagnetic environment as defined by Standards EN
61326-1:2006, or IEC 61326-1:2005.
Declaration of Conformity based on tests conducted by Chomerics Test Services, Woburn, MA 01801, USA in
September, 2001. Test records are outlined in Chomerics Test Report #EMI3053.01. Further testing was
conducted by Chomerics Test Services, Woburn, MA. 01801, USA in January, 2009. Test records are outlined
in Chomerics Test report #EMI5243.09.
We hereby declare that the equipment specified conforms to the above Directives and Standards.
Carl Haapaoja, Director of Quality Assurance
Measurement Computing Corporation
10 Commerce Way
Suite 1008
Norton, MA 02766
USA
Electrical equipment for measurement, control and laboratory use.
PCI-DIO48H