JVC DR-MH300BE Instructions Manual page 49

Dvd & hdd video recorder
Hide thumbs Also See for DR-MH300BE:
Table of Contents

Advertisement

F
Select and confirm on ASaveB.
SELECT
Save
CONFIRM
0
The AScheduleB area screen is displayed, with
the new timer programme added.
0
If you do not wish to save, select ADon’t SaveB,
then press ENTER.
If setting the recording deck, recording
mode, etc.
To set the recording deck, recording mode,
recording interval, etc. operate as a change of
timer programme.
G
Confirm that the tile on the right of the
added timer programme is selected.
SELECT
HDD SP Once
H
Set the recording deck.
0
Switches between AHDDB and ADVDB each
time the button is pressed.
I
Set the recording mode.
0
The recording mode switches each time the
button is pressed.
See ARecording ModeB [
P84].
0
Setting the FR mode.
1. Press ENTER when AFR**B appears.
2. Enter the desired number using the Number
Keys.
If the number entered does not exist in the
recording mode, the nearest number in the
recording mode will be selected.
(Example) If FR460 is entered, FR480 will
be selected, as FR460 does not exist.
3. Press ENTER to confirm.
FR60 - FR360 can be set by 5-minute intervals,
then follow by FR420 and FR480.
J
Set the recording interval.
0
The weekly/daily recording setting switches
each time the button is pressed.
See AWeekly/Daily Timer ProgrammingB
[
P86].
K
Set the timing for the end of recording.
SELECT
+0
0
Press Selection Key (E) to display the hidden
tile.
0
You can extend the recording end time or set
VPS/PDC by pressing the Action (GREEN)
button.
0
ATimingB extends the recording end time only
for the time duration specified.
L
Set the category.
0
The category switches each time the button is
pressed.
0
Cannot be set if the programme listing data is
not downloaded.
To continue with other timer programmings, repeat
A
L
D
-
step
-
.
E
Exit programming setup.
0
Press STANDBY/ON to turn off when not
performing other operations.
To timer record using VPS/PDC
F
j
Press VPS/PDC
.
0
This unit turns off automatically and enters into
recording standby mode.
0
e lights up on the front display panel indicating
that VPS/PDC recording is activated.
EN I
Page 49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dr-mh300se

Table of Contents