JVC DR-MH300BE Instructions Manual page 103

FUNCTION SET UP > VIDEO IN/OUT
j L-1 OUTPUT
For setting the output signal of the connector in accordance with the connecting device, when using the SCART connector [L-1]
on the rear panel.
SCART VIDEO
SCART S-VIDEO
SCART RGB
COMPONENT
k L-1 INPUT
For setting the input signal of the connector in accordance with the connecting device, when using the SCART connector [L-1]
on the rear panel as a input connector.
VIDEO
S-VIDEO
l L-2 SELECT
Setting for the SCART connector [L-2] on the rear panel. Mainly for setting the input signals accordingly when connected. Also,
when this unit is turned off, signals of an external tuner can be set to be output from [L-1]. The items that can be set changes
depending on the AL-1 OUTPUTB setting. [
VIDEO/RGB
S-VIDEO/RGB
SAT VIDEO/RGB
SAT S-VIDEO/RGB
DECODER
FUNCTION SET UP > CONNECTION
m HDMIBDVI COLOUR
For setting the desired images (image quality, colour intensity and black fading), when connecting to the TV's DVI terminal.
STANDARD
ENHANCE
n HDMI OUTPUT
For setting the image format from this unit's HDMI output terminal. [
AUTO
RGB FIX
INITIAL SET UP > TUNER SET
For setting receiving channels. [
INITIAL SET UP > CLOCK SET
For setting the clock. [ P35]
Outputs video signals.
Outputs S-Video signals.
Outputs RGB signals.
Outputs component video signals. (If connecting to the TV via the component
terminal.)
If connecting video signals.
If connecting S-Video signals.
P34]
If connecting video signals.
If connecting S-Video signals.
If connecting video signals with an external tuner.
If connecting S-Video signals with an external tuner.
If connecting a decoder.
Does not adjust the image quality automatically.
Adjusts the image quality automatically.
Normal setting.
When a normal image is not displayed due to the TV specifications.
P36]
P62]
EN I 103