Output/Input Set - JVC DR-MH200SE Instructions Manual

EDITING
64
EN

Output/Input Set

●
Turn on the TV and select the AV mode.
●
Slide the TV/CABLE/SAT/DVD switch to DVD.
ENTER
L-1 Output And L-1 Input Setting
The [L-1 IN/OUT] connector accepts and delivers either a composite
signal (regular video signal) or a Y/C signal (a signal in which the
luminance and chrominance signals are separated). Set
AL-1 OUTPUTB and AL-1 INPUTB to the appropriate mode depending
on the type of appliance connected to the unit's [L-1 IN/OUT]
connector.
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to select AFUNCTION SET UPB, then
press G.
3
Press selection keys
to select AVIDEO IN/
OUTB, then press G.
4
Press selection keys
to select
AL-1 OUTPUTB or
AL-1 INPUTB, then
press ENTER.
5
Press selection keys
to select the
appropriate setting,
then press ENTER.
6
Press SET UP to
complete the setting.
\
CABLE/SAT
TV DVD
Selection Keys
FGDE
SET UP
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
REC/PLAY SET UP DISPLAY SET VIDEO IN/OUT
MONITOR TYPE 4:3LB
F-1 INPUT
VIDEO
L-1 OUTPUT SCART VIDEO
L-1 INPUT VIDEO
L-2 SELECT VIDEO
SET UP ENTER
SELECT WITH @ THEN PRESS [ENTER]
PRESS [SET UP] TO EXIT
EXIT SELECT
DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP
REC/PLAY SET UP DISPLAY SET VIDEO IN/OUT
MONITOR TYPE 4:3LB
F-1 INPUT
VIDEO
L-1 OUTPUT
SCART VIDEO SCART VIDEO
SCART S-VIDEO
L-1 INPUT VIDEO
SCART RGB
COMPONENT
L-2 SELECT VIDEO
SELECT WITH @ THEN PRESS [ENTER]
SET UP ENTER
PRESS [SET UP] TO EXIT
EXIT SELECT
* The boldface settings below indicate the settings at your purchase.
L-1 OUTPUT
8
RGB / COMPONENT
SCART VIDEO
If a connected appliance's input is compatible only with regular
video signals, set to ASCART VIDEOB
SCART S-VIDEO:
If a connected appliance's input is compatible with Y/C signals,
set to ASCART S-VIDEOB. You can obtain high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
SCART RGB:
If a connected appliance's input is compatible with RGB signals,
set to ASCART RGBB. You can obtain a high-quality RGB
picture.
COMPONENT:
If a connected appliance's input is compatible with Y/P
signals, set to ACOMPONENTB. You can obtain a high-quality Y/
P /P picture. Switch the TV to the input that you can watch
B R
component video pictures.
L-1 INPUT
8
VIDEO
:
If a connected appliance's output is compatible only with regular
video signals, set to AVIDEOB.
S-VIDEO
:
If a connected appliance's output is compatible with Y/C
signals, set to AS-VIDEOB. You can obtain a high-quality picture.
(For connection, be sure to use a 21-pin SCART cable that is
compatible with the Y/C signal.)
NOTES:
●
If AL-1 OUTPUTB is set to ASCART S-VIDEOB or ASCART RGBB, it
is not possible to set AL-1 INPUTB to AS-VIDEOB.
●
If AL-2 SELECTB is set to ASAT S-VIDEOB or ADECODERB, it is not
possible to set AL-1 INPUTB to AS-VIDEOB.
●
If AL-2 SELECTB is set to ADECODERB, it is only possible to set
AL-1 OUTPUTB to ASCART VIDEOB
●
Component video signals are not output from the [L-1 IN/OUT]
connector.
●
When Progressive scan mode is engaged, it is not possible to
select the setting of AL-1 OUTPUTB. (A pg. 64)
INITIAL SET UP
INITIAL SET UP
SCART VIDEO
^ / SCART S-VIDEO / SCART
:
.
VIDEO
^ S-VIDEO
/
.
/P
B R