General
Max. Power Saving
Game Mode
Auto Power
Safety Lock
Button Lock
Standby Control
Lamp Schedule
- The displayed image may differ depending on the model.
Button Lock
This menu can be used to lock the buttons on the product.
On
Only the remote control can control the product if
Off
•
Off
Off
Standby Control
Off
You can set the screen standby mode to be applied when an input signal is received.
Auto
•
Off
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
Off
The message
On
•
Off
Power-saving mode will activate if no input signals are detected.
Off
•
The message
― The
― If
Lamp Schedule
Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode.
Off
•
Button Lock
/
On
No Signal
will appear if no source device is connected.
No Signal
will appear if no input signals are detected.
Standby Control
option is only enabled when
No Signal
is displayed although a source device is connected, check the cable connection.
On
/
is set to On.
Source List
is set to PC, DVI, HDMI.
78