Spinning; Final Spin Speed; Rinse And Interim Spin; To Omit The Final Spin (Rinse Hold) - Miele W 1611 Operating Instructions Manual

Final spin speed

Programme
Cottons
Minimum iron
Delicates
Woollens
Express
Automatic
Shirts
Denim
Dark garments
Spin
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.

Rinse and interim spin

There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the
interim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cottons programme, an additional rinse
is introduced.

To omit the final spin (Rinse hold)

^ Select the e setting using the Spin
rpm
speed button. The laundry will not be
1100
spun and will remain suspended in
1100
the final rinse water. This reduces
600
creasing if the laundry is not going to
1100
be removed from the drum immedi-
1100
ately after the end of the programme.
1100
– To start the final spin:
600
900
The washing machine will display the
maximum spin speed possible. You
1100
can select a spin speed lower than
1100
this. Start the final spin by pressing
the Start/Stop button.
– To end the programme:
Press the Door button. The water will
drain away. Press the Door button
again to open the door.
To omit rinse and interim spin and
the final spin (No u)
^ Select the No u setting using the
Spin speed button. The laundry is not
spun after the final rinse. The water
will drain away and the machine will
go straight into the anti-crease stage.
An additional rinse is introduced if
this setting is selected with the
Cottons, Minimum iron, Express and
Automatic programmes.

Spinning

19