Download  Print this page

JVC DR-DX5SU Instructions Manual Page 78

Mini dv & dvd & hdd video recorder.
Hide thumbs

Advertisement

Table of Contents
TROUBLESHOOTING
78
EN
Playback (DV Deck)
The DV deck cannot be operated.
The DV deck is not selected.
] Press DV/HDD/DVD SELECT on the unit repeatedly or DV on
the remote control so that the DV lamp lights up on the unit.
The tape will not rewind or fast-forward.
The tape is already fully rewound or fast-forwarded.
] Check the cassette.
The playback picture does not appear while the tape is
running.
The TV is not set to the AV mode.
] Set the TV to the AV mode.
Noise appears during visual search.
This is normal.
The playback picture is blurred or interrupted while TV
broadcasts are clear or AUSE CLEANING CASSETTEB
message appears on the screen.
The video heads may be dirty.
] Use a dry cleaning cassette M-DV12CL, or consult your JVC
dealer.
Recording (DVD Deck)
The desired program cannot be recorded.
The channel position does not correspond to that in the
receiving area.
] Set the correct channel position for the receiving broadcast.
(A pg. 22)
Recording cannot be made.
No disc or a disc not being compatible with the unit is loaded.
] Load a recordable disc on the unit. (A pg. 7)
The disc loaded is not formatted.
] Format the disc. (A pg. 74)
A finalized DVD-R disc is loaded.
] Recording cannot be made on finalized discs. Load a
recordable disc on the unit.
The disc is full or does not have enough space for the title to be
recorded.
] Clear unnecessary titles on the disc or load a blank disc.
(A pg. 52)
The DVD-RAM disc loaded has had its protect tab slid to the
protect position.
] Release the protect tab. (A pg. 10)
Recording (HDD Deck)
TV broadcasts cannot be recorded.
AL-1B or AF-1B has been selected as the input mode.
] Set to the desired channel.
Camcorder recording is not possible.
The camcorder has not been properly connected.
] Confirm that the camcorder is properly connected.
The input mode is not correct.
] Set the input mode to AF-1B. (A pg. 62)
Recording (DV Deck)
During recording, the tape does not run. The DV recording
lamp lights up on the unit.
The unit is in the Record Pause mode.
] Press I to resume recording.
Recording cannot be done.
There is no cassette loaded, or the cassette loaded has had its
erase protection switch set to ASAVEB.
] Insert a Mini DV cassette, or set the erase protection switch set
to ARECB.
An attempt has been made to record from this unit's built-in
tuner.
] It is not possible to record from this unit's built-in tuner to the DV
deck. Record to the HDD or a DVD disc.
If you want to record on a DV tape, record by connecting the
output of the external equipment such as a cable box to this
unit's external input ([L-1], etc.).
Camcorder recording is not possible.
The camcorder has not been properly connected.
] Confirm that the camcorder is properly connected.
The input mode is not correct.
] Set the input mode to AF-1B or ADVB.
The tape is automatically rewound, then the unit is shut off.
The end of the tape was reached during recording.
] The program may not have been recorded in its entirety. Next
time make sure you have enough time on the tape to record the
entire program.
Audio dubbing is not possible.
ADV AUDIO RECB had been set to A16BITB at the original
recording.
] Set ADV AUDIO RECB to A12BITB at the original recording.
The tape speed had been set to LP at the original recording.
] Set the tape speed to SP at the original recording.
Monitoring the audio dubbed sound is not possible during
audio dubbing.
] This is normal. Monitor the sound using the connected devices.

Advertisement

Table of Contents

   Related Manuals for JVC DR-DX5SU

This manual is also suitable for:

Dr-dx5sekDr-dx5selDr-dx5seuDr-dx5seyDr-dx5sezDr-dx5sus

Comments to this Manuals

Symbols: 0
Latest comments: