Download Print this page

Miele S 247i Technical Manual: Fault/overheat Indicator Lamp; S 2xx; S 4xx; Plug Housing

Hide thumbs


S 2xx, S 3xx & S 4xx Canister Vacuums

Figure 5-26: S 4xx Electronic Removal


Fault/Overheat Indicator Lamp


S 2xx

Remove the foot switch assembly (Section 5.8). The indicator lamp(s) should
always be pushed out from below as they are clipped into place.

S 4xx

The lamp can be removed from below by gently pulling its connection wires.

Plug Housing

S 25x
1. Remove the cap and foot switch assemblies (Sections 5.6 and 5.8).
2. Release the retaining clips and remove the plug housing.
Technical Information


   Also See for Miele S 247i

Comments to this Manuals

Symbols: 0
Latest comments:
  • Ching-Chung Lai Jan 12, 2015 04:10:
    I'm using canister S234i. Due to the Power on/off switch malfunctio​n. I ordered one ea for the replacemen​t and need the replacemen​t instructio​ns. How could I dowmload s234i's Technical Manual? Would you please provide your comments to E-mail:cui​u0@yahoo.c​

    You​r any comments will be highly appreciate​d!

    Best Regards,
    C​.C. Lai
  • Ching-Chung Lai Jan 12, 2015 04:07:
    How can I dowmload s234i's Technical Manual?