Cisco 7912 IP Phone Quick Start Guide
Using the Monitor
To activate the speaker
You will be able to hear the
call but your caller will not be
able to hear you
To switch from the speaker
to the handset
To adjust the speaker
7912 IP Handset Guide
'Soft Button' refers to one of the four buttons at the
bottom of the phone's display area. The function of
these buttons change (hence the term 'Soft')
depending on what operation the phone is performing.
The relevant current function for a Soft button is
always shown on the display immediately above the
The Navigation button is a vertical rocker switch
located just below the phone display. This Up / Down
button is used to scroll the phone display whenever a
multi choice menu is presented. The current selection
on the phone display will be contrast highlighted.
The 7912 phone has a built in hands free speaker but
there is no microphone other than in the handset. This
speaker functionality is known as the 'monitor feature'.
You can use the speaker to monitor (listen to) a call,
however to talk on a call you must pick up the handset.
During a call, press the Monitor soft button, then
hang up the handset
Pick up the handset and press the MonOff soft
Press the up or down volume button when the
speaker is in use
Press the Save soft button to save your changes