Yamaha disklavier tv User Manual page 15

3
Scroll down through the screens and select "Firmware U" using the cursor button
([▼]), then press [ENTER].
=Update=
-----------------------
*Firmware U
The download process of the update program starts.
=Update=
Now Downloading...
50% ( 1 / 1 )
4
After the download process is completed, shut down the Disklavier with [ON/OFF]
on the control unit.
=Update=
Turn OFF,Turn ON again
while holding [PLAY]
The update program is now prepared.
5
Holding [PLAY/PAUSE] on the control unit, press [ON/OFF].
+
Hold
The current version information of each module appears one after the other.
6
Press [ENTER] on the control unit.
The starting screen appears.
(Center of the button)
7
Press [ENTER] on the control unit again.
After a while, the update confirmation message of each module appears.
(Center of the button)
= ?
*Cancel
?
CTRL system v3.30
*UPDATE (ENT)
REWRITE SYSTEM PROGRAM
(ENT)
v3.30 ] v3.50
MC -SURE? (PLAY,STOP)
Updated version
(v3.50 or later for Disklavier E3;
v3.52 or later for DKC-850)
DisklavierTV User's Guide (For Disklavier E3 and DKC-850 Users)
Preparation
15