Download Print this page

Advertisement

System Error Codes
System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
HP Designjet T1100 MFP, 4500mfp, 4500 Scanner, 820 MFP Service Manual
2-12
55-525
The IT8 reference file could not be found.
A standard IT8 reference file will be used instead. Note that optimal color
calibration requires the correct reference file for the current IT8 sheet.
55-527
Could not recognize the scanned IT8 picture.
Inspect the calibration sheet for scratches or wear and replace it if the
problem continues.
55-530
When checking new calibration, the result was not within the limits.
Inspect the calibration sheet for scratches or wear and replace it if the
problem continues.
55-531
Calibration stopped
Maximum time was exceeded. Turn scanner off and then turn it back on.
Wait 15 minutes before running the program.
55-601
Scanner is initializing
Turn scanner off and then turn it back on. Wait 15 minutes before
running the program.

Advertisement

Table Of Contents

Troubleshooting

   Related Manuals for HP Designjet T1100

This manual also for:

4500mfp, 4500, 820 mfp

Comments to this Manuals

Symbols: 0
Latest comments: