Download Print this page

Advertisement

System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
System Error:
Problem
Description:
Corrective Action: Try the following:
HP Designjet T1100 MFP, 4500mfp, 4500 Scanner, 820 MFP Service Manual
55-213
The vertical difference for camera C is too big for automated stitching.
Run SCANtest 6, test 11 ⇒ Page 1-6.
55-214
The vertical difference for camera D is too big for automated stitching.
Run SCANtest 6, test 11 ⇒ Page 1-6.
55-317
Could not read bar codes on the calibration sheet.
To use default calibration parameters during adjustment, press OK. Press
Cancel to end the program.
55-318
Basic calibration was performed, but failed to stitch the scanner.
Inspect the calibration sheet for scratches or wear, replace it if the
problem continues, and then run the program again.
55-319
The calibration sheet was not recognized as the right sheet for this scanner.
Inspect the calibration sheet for scratches or wear and replace it if the
problem continues.
55-401
Can't find stitchlines.
Inspect the calibration sheet for scratches or wear and replace it if the
problem continues.
System Error Codes
2-9

Advertisement

Chapters

Troubleshooting

   Related Manuals for HP Designjet T1100

This manual also for:

4500mfp, 4500, 820 mfp

Comments to this Manuals

Symbols: 0
Latest comments: