Download Print this page

Advertisement

4 Loosen the two screws that secure the Roller Sensor.
5 Using the 1.5 mm end of each of the two Adjustment Tools, insert them on
Roller sensor
fixing screws
6 Adjust the position of the Roller Sensor so that the green Ready LED just
Ready LED
7 Using the 1 mm end of each of the two Adjustment Tools, insert them on
Roller sensor
fixing screws
8 Check that the green Ready LED is OFF.
Ready LED
9 Tighten the two screws that secure the Roller Sensor.
HP Designjet T1100 MFP, 4500mfp, 4500 Scanner, 820 MFP Service Manual
both sides of the Roller Sensor under the roller shaft.
about turns ON.
both sides of the Roller Sensor under the roller shaft
Scanner Adjustments and Calibrations
Adjustment tools
Adjustment tools
5-29

Advertisement

Table Of Contents

Troubleshooting

   Related Manuals for HP Designjet T1100

This manual also for:

4500mfp, 4500, 820 mfp

Comments to this Manuals

Symbols: 0
Latest comments: