7 The Scanner will now perform some internal adjustments. In order to do this
8 Once the internal adjustment has been done, you will need to insert the
9 Once the Scanner detects that the Focus Adjustment Pattern is correctly
HP Designjet T1100 MFP, 4500mfp, 4500 Scanner, 820 MFP Service Manual
you will need to remove the Optical Adjustment Pattern and close the Guide
Focus Adjustment Pattern in the Scanner.
It's best to insert the left corner of the Focus Adjustment Pattern first and then
slide the right side of the pattern in to place.
The middle pattern is to be used for adjustment
positioned you will be able to select next to continue.
Scanner Adjustments and Calibrations
Select next to continue
(when it appears)