Adjusting the Camera Using the Camera Wizard
1 Make sure that the cameras are all installed correctly and all cables are
2 Start SCANtest 6 and select: 27. Camera Adjustment Wizard.
3 The Camera Adjustment Wizard will start with the welcome screen. Select
HP Designjet T1100 MFP, 4500mfp, 4500 Scanner, 820 MFP Service Manual
Preparing the Scanner
Before you start make sure that you have the following items, which are
necessary to complete the Camera Adjustment:
The SCANtest6 is installed in the touch screen (programs - Scanner Test
Program - Scantest 6).
Focus Adjustment Pattern sheet (included in the Service Patterns pn
Optical Adjustment Pattern (pn Q1277-60031).
Make sure that the scanner you are adjusting is fully functional. If the
scanner is not operational, you will not be able to adjust the camera.
Make sure that the left and right covers are installed and the
top cover is removed. The scanner and the touch screen must
be switched ON.
next to contine.
Scanner Adjustments and Calibrations
Select button 27
Select next to continue