Download Print this page

Advertisement

Power Supply Board

Removal
Switch off the printer, the scanner, and the PC, and then disconnect them from
the power source prior to performing any maintenance.
HP Designjet T1100 MFP, 4500mfp, 4500 Scanner, 820 MFP Service Manual
1. Remove the Top Cover ⇒ Page 4-5.
2. Remove three T10 screws that secure the
Metal Shield that covers the Power Supply
Board.
The components underneath the
Metal shield represent a risk of
electric shock, once the power has
been
disconnected
minutes
discharge
touching.
3. Remove the Metal Shield.
4. Remove the T20 screw that secures the
grounding cable to the chassis and
disconnect ALL the cables from the Power
Supply Board.
Removal and Installation
allow
three
time
before
4-31

Advertisement

Chapters

Troubleshooting

   Related Manuals for HP Designjet T1100

This manual also for:

4500mfp, 4500, 820 mfp

Comments to this Manuals

Symbols: 0
Latest comments: