Descaling The Appliance; Technical Data; Cleaning And Maintenance - Black & Decker DCM90 Instructions Manual

Hide thumbs

Table Of Contents

Table of Contents

Available languages

ENGLISH

Aroma Feature

This feature slows the brew cycle slightly to

provide a richer flavour if so desired. The aroma

feature can only be set when the coffee maker is

on or the timer is programmed and set. Press

the 'AROMA' button (3.4) to turn the feature on,

press it again to turn it off. The display will show

the aroma icon.

Clean

The clean icon will be displayed when the coffee

maker requires descaling. Follow the

instructions outlined in the 'Care and Cleaning'

section. The clean icon will be displayed

continuously until reset by unplugging the coffee

maker from the mains supply.Replace the carafe

on the hotplate and allow the remainder of the

coffee to drip into the carafe.

LCD backlight setting function

The blue backlight display can be set to be

continuously on by pressing the 'HOUR' and

'MIN' buttons together for approximately 5

seconds. To revert to display back to the default

setting, press the 'HOUR and 'MIN' buttons

together again for approximately 5 seconds.

Cleaning and maintenance

Warning! Before cleaning and maintenance,

switch the appliance off and remove the plug

from the socket.

• Using the handles, remove the filter (12) and

the filter holder (8) from the filter holder

compartment (9). Remove the used coffee

grounds from the filter.

• Wash the carafe (4), the filter holder and the

filter in hot, soapy water. Dry all parts and

refit them.

• Wipe the outside of the appliance with a

damp cloth.