Installation Instructions - KitchenAid KEMS378S Technical Education

PREPARE BUILT-IN MICROWAVE/
OVEN COMBINATION
1. Decide on the final location for the oven.
Locate existing wiring to avoid drilling into
or severing wiring during installation.
WARNING
Excessive Weight Hazard
Use two or more people to move and
install oven.
Failure to do so can result in back or
other injury.
2. To avoid floor damage, set the oven onto
cardboard prior to installation. Do not use
handle or any portion of the front frame for
lifting.
3. Remove the shipping materials and tape
from the oven.
4. Remove the hardware package from inside
the bag containing literature.
5. Remove and set aside racks and other
parts from inside the oven.
6. Move oven and cardboard close to the
oven's final location.

INSTALLATION INSTRUCTIONS

REMOVE OVEN DOOR
IMPORTANT: Use both hands to remove oven
door.
1. Open the oven door.
2. Locate the oven door latches in both corners
of the oven door, and rotate the latches
forward to the unlocked position.
A. Oven door latch in locked
position
3. Grasp the edges of the oven door with both
hands and close the oven door until it will
no longer close. Lift and pull oven door
toward you and remove. Set the oven door
aside on a covered work surface.
2-4
A
B. Oven door latch in unlocked
position
B