Basic Playback - JVC XV-N35SL Instructions Manual

Jvc dvd video player instructions
Table of Contents

Advertisement

6
Press 5/∞ to select a desired digital output
signal type.
Set this item correctly when you connect the unit to an
external surround decoder or D/A converter. (If you do not
connect the unit to such a device, you do not have to set this
item.)
• When connecting to a Dolby Digital decoder, select
[DOLBY DIGITAL/PCM].
• When connecting to a DTS or MPEG Multichannel decoder,
select [STREAM/PCM].
• When connecting to other digital device, select [PCM
ONLY].
7
Press ENTER.
The TV screen returns to the opening display.
To bring up the DVD PLAYER SET UP display later
Press CHOICE for a few seconds until the DVD PLAYER SET UP
display appears.
To change the brightness of the display window
Press DIMMER.
You can select the display window brightness from three levels.

Basic playback

1
Press 0 to open the disc tray.
2
Place a disc in the disc tray.
IV E
SS
RE
O G
PR
• To insert an 8-cm disc, place it in the inner recess.
3
Press 3.
The unit starts playback from the beginning.
If a menu is shown on the TV screen
When inserting a DVD VIDEO, SVCD or Video CD disc, a menu
may be shown on the TV screen. From the menu, you can select
a desired item to be played back.
For DVD VIDEO
1 Press 5/∞/2/3 to select a desired item.
2 Press ENTER.
The unit starts playback of the selected item.
For SVCD/Video CD
Press the numeric buttons to select a desired item.
The unit starts playback of the selected item.
NOTES
• Do not insert an unplayable disc. (See page 2.)
• When inserting a disc on the disc tray, be sure to position the
disc inside the recess. Otherwise, the disc may be damaged
when the disc tray is closed, or you may not be able to remove
the disc from the unit.
About PBC (Playback Control)
Some SVCD/Video CD discs support the PBC function.
The PBC function allows you to enjoy menu-driven operation
and high-resolution still images which have a resolution four
times greater than moving pictures.
• To play a PBC-compatible SVCD/Video CD disc without
activating the PBC function, press the numeric buttons
instead of 3 to start playback.
• To activate the PBC function again,
1) press TOP MENU or MENU,
or
2) press 7 to stop playback, then press 3.
Basic operations
With the label side up
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xv-n33slXv-n30bk

Table of Contents