MSI MS-7358 User Manual page 28

Ms-7358 ( v1.x ) mainboard
Hide thumbs Also See for MS-7358:
Table of Contents

Advertisement

M S-7358 M ainboard
Fan Power Connectors: CPUFAN1, SYSFAN1
The fan power connectors support system cooling fan with +12V. W hen connecting
the wire to the connectors, always note that the red wire is the positive and should
be connected to the +12V; the black wire is Ground and should be connected to GND.
If the mainboard has a System Hardware Monitor chipset on-board, you must use a
specially designed fan with speed sensor to take advantage of the CPU fan control.
Important
1. Please refer to the recommended CPU fans at processor's official website
or consult the vendors for proper CPU cooling fan.
2. CPUFAN1 / SYSFAN1 supports fan control. You can adjust fan speed in H/W
Monitor menu of BIOS and install Dual Core Center utility that will auto-
matic ally c ontrol the CPU fan speed ac c ording to the ac tual CPU
temperature.
3. Fan cooler set with 3 or 4 pins power connector are both available for
CPUFAN1 and SYSFAN1.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
2-14
GND
+1 2V
SENSOR
CONTROL
CPUFAN1
1
2
JCI1
CONTROL
SENSOR
+1 2V
GND
SYSFAN1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Q35mdoG33mdhQ33m

Table of Contents