Operating Jvc's Audio/Video Components; Operating Audio Components - JVC RX-DV31 Instructions Manual

Operating JVC's Audio/Video Components

You can operate JVC's audio and video components with this unit's remote control, since control signals for JVC's components
are preset in the remote control.
65

Operating Audio Components

To operate JVC's audio components using this remote
control:
• Aim the remote control directly at the remote sensor on the
unit.
• To operate a source with the remote control, the source
must be selected using the source selecting buttons on the
remote control.
• Refer also to the manuals supplied with your components.
7 Sound control section (Amplifier)
You can perform the following operations:
BASS + or – Adjusts the bass sound.
TREBLE + or – Adjusts the treble sound.
AUDIO POSITION Adjusts the subwoofer audio
position.
SURROUND ON/OFF Turns on or off the Surround
modes—Dolby Digital, DTS Digital
Surround, and Dolby Pro Logic II.
SURROUND MODE Selects the Surround modes.
Turns on or off the test tone output.
TEST
CENTER + or – Adjusts the center speaker channel
output level.
SURR L + or – Adjusts the left surround speaker
channel output level.
SURR R + or – Adjusts the right surround speaker
channel output level.
SUBWFR + or – Adjusts subwoofer channel output
level.
EFFECT Selects the effect level.