JVC RX-DV31 Instructions Manual page 24

Basic DVD Player Operations
About Resume play
This unit can memorize the point when you operate the
following procedures:
• Pressing 7 during play—Pressing 3 starts Resume play
• Changing the source—Pressing DVD or 3 starts
Resume play
• Turning off the unit (including Sleep Timer)—
Pressing 3 starts Resume play
Once you start Resume play, the RESUME indicator goes
off (the unit clears the memorized point).
The unit also clears the memorized point when you
operate the following procedures:
• Pressing 7 (while the RESUME indicator is lit on the
display)
• Selecting a track by pressing ¢ or 4 for video CD
and super VCD when playback stops
• Selecting program or random playback
• Pressing TOP MENU
• Ejecting the loaded disc
• Turning on the unit by pressing
front panel or AUDIO on the remote control
• Activating/deactivating Tray Lock.
You can cancel Resume play (see "Other setting menu—
OTHERS" on page 58).
19
STANDBY/ON on the
About Tray Lock
You can prevent the disc tray from opening unintentionally
by using Tray Lock.
On the front panel ONLY
To lock the disc tray, press 0 while pressing SETTING
when the unit is in standby mode.
The unit is turned on and "LOCKED" appears on the
display for a little while.
• If you try to open the disc tray, "LOCKED" appears to let
you know that the Tray Lock is in use.
To unlock the disc tray, repeat the above procedure.
The unit is turned on and "UNLOCKED" appears briefly on
the display.
The disc tray is unlocked.