Fit the wall units and rangehood
before fitting the barbecue grill to
avoid damaging the surface.
The veneer or laminate coatings of
worktops (or adjacent kitchen units)
must be treated with 100 °C
heat-resistant adhesive which will not
dissolve or distort.
Any backmoulds must be of
After installing the grill, ensure that
the connection cable is without
hindrance and that there is no
mechanical obstruction which could
damage it, e.g. when draining the
This appliance must not be installed
and operated in mobile installations
(e.g. on a ship).
Ensure that the electrical cable is
installed in such a way that it does not
touch any parts of the appliance which
become hot. The cable will be
damaged by extreme heat.
Observe carefully the safety
distances given on the following pages.
Safety instructions for installation
All dimensions in this instruction booklet
are given in mm.
This appliance must be installed
and connected to services in
accordance with local and national
safety and building regulations.