General safety precautions
Siemens Building Technologies
Fire Safety & Security Products
The instructions in this document are designed only for the following target group.
Technical training for
building or electrical
Read the general safety precautions before operating the device.
Follow all warnings and instructions marked on the device.
Keep this document for reference.
Always pass this document on together with the product.
Please also take into account any additional country-specific, local safety
standards or regulations concerning project planning, operation and disposal of
It is recommended that all preparatory work (e.g. fitting of accessories) be
carried out in a workshop prior to final installation.
Do not connect the device if it is damaged or any parts are missing.
Do not make any changes or modifications to the device unless they are
expressly mentioned in this manual and have been approved by the
Use only spare parts and accessories that have been approved by the
Risk of failure due to incorrect installation
The fuse for the device and the fuse for the electrical system of the building must
be installed separately.
Risk of cable damage due to stress
Use only cable types that are approved for the environmental requirements.
The cable glands used must be appropriate for the cable diameter.
Condition of the
Installs the product,
Components of the
product are not yet
of the product or
installed or need to be
replaced or modified.