Mounting The Camera Housing Assembly - Siemens CHSL4010 Installation Manual

Large camera housing
Table of Contents

Advertisement

5.4

Mounting the Camera Housing Assembly

Siemens Building Technologies
Fire Safety & Security Products
The housing has a set of 4 x M6 x 10 mm deep tapped holes on a 101.6mm (4")
PCD for mounting the camera housing to a bracket. Ensure the screws used to
mount the housing to a bracket do not bottom out in the mounting holes by being
too long.
1.
Screw the mounting bracket to the base of the unit (A) (see Fig. 6).
2.
Secure the assembly following the bracket installation instructions.
Fig. 6
Mounting the Camera Housing Assembly
Mounting
13
09.2008

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chsl4011

Table of Contents