Download Print this page

Honeywell HX3 Quick Start Manual page 13

Wearable computer with microsoft windows ce 5.0 operating system
Hide thumbs

Advertisement

Setting up the HX3
Please have the following Information available before setting up your HX3:
Network ID (SSID) of the Access Point
l
WEP key or LEAP authentication credentials
l
1.
Connect a fully charged battery to the HX3.
2.
Press the Power button.
3.
Connect via ActiveSync
4.
Copy LXEConnect files to PC.
5.
Install and launch LXEConnect
6.
Accept the EULA.
7.
Set the date and time.
8.
Edit the radio parameters.
9.
Perform a reboot.
Bluetooth and HX3
Please refer to the HX3 Reference Guide for information when using the HX3 with
Bluetooth.
ActiveSync
Installing ActiveSync on Desktop/Laptop
ActiveSync (version 4.5 or higher for Windows XP desktop/laptop computers) must be
resident on the host (desktop/laptop) computer. Windows Mobile Device Center is
required for a Windows Vista/Windows 7 desktop/laptop computer. ActiveSync and
Windows Mobile Device Center for the PC are available from the Microsoft website.
Follow Microsoft's instructions to locate, download and install ActiveSync or Windows
Mobile Device Center on your desktop/laptop.
ActiveSync using USB-Client Connection
The only connection type is USB Client.
1.
Connect the HX3 end of the cable to the connector on the bottom of the HX3.
2.
Connect the USB type A connector on the I/O cable to a USB port on a PC or
laptop.
ActiveSync starts automatically when the USB cable is connected.
When the HX3 loses connection, the connection to ActiveSync is lost. Disconnect the
PC end of the cable and re-connect.
Please refer to the HX3 Reference Guide for ActiveSync information.

Advertisement

loading

  Also See for Honeywell HX3

  Related Manuals for Honeywell HX3