Rear Panel - JVC LET0213-001A Instructions Manual

Preliminary knowledge

Rear panel

1
AUDIO OUT jacks (LEFT/RIGHT) (13, 16)
Outputs stereo analog audio signals.
2
AC power cord (17)
3
DIGITAL OUT PCM/STREAM jack (COAXIAL) (16)
Outputs digital audio signals. You must select the
signal type correctly according to the external device
connected to via the Preference setting display.
4
VIDEO OUT AV-connector (15)
The standard 21-pin SCART connector outputs video
and audio signals. See "To connect to a TV with the
SCART connector" on page 15 for details.
5
S-VIDEO jack (13)
Outputs S-video signals.
Note that this jack does not feed correct signals when
you make the unit feed the RGB signals. See "To
connect to a TV with the SCART connector" on page 15
for details.
8
1
RIGHT LEFT
AUDIO OUT
DIGITAL OUT VIDEO OUT
AV
PCM STREAM
COAXIAL
3 4
COMP. S-VIDEO
AV COMPU LINK
S-VIDEO VIDEO
RGB AND VIDEO
Y C
RGB
5 6 7 8
6
VIDEO jack (13)
Outputs a composite video signal.
7
VIDEO OUT SELECT switches (14, 15 )
You can select the video signal type by the COMP./
RGB-Y/C switch and the RGB/S-VIDEO AND VIDEO
switch.
8
AV COMPU LINK jacks
These jacks are provided for use in the future. They
are currently not used.
9
Region Code label (12)
Shows Region Code number.
2
2
9