Connecting The Power Cord (Supplied) - JVC D-ILA LD-HD2KBU Instructions Manual

Control from external device
It is possible to control this unit by connecting a computer to the [RS-232 CONTROL] terminal at the rear of this unit.
Please request a connection cable from us if needed.
For details, please consult your authorized dealer.

Connecting the Power Cord (Supplied)

Before plugging in the power cord, ensure that all devices have been connected.
Power Cord
(Supplied)
Cautions Against Fire and Electric Shock
● When not using devices, remove the power plug from the wall outlet.
● Do not use power cords for connection other than those supplied.
● Do not use a power voltage different from that which is indicated.
● Do not cut, tear or modify the power cords. Also, do not place a heavy object on, heat or stretch the power cords as this
may cause damage to the cords.
● Do not insert or pull out plugs with a wet hand.
RS-232C Connection Cable (Sold Separately)
(Straight Cable)
a
Connect the supplied power cord to the [AC INPUT]
a
terminal of this unit
b
Connect the earth wire to the earth terminal
available in the building, followed by inserting the
b
main plug of the supplied power cord into the
outlet
Rear side of this unit
ASS-THRU MONITOR RED/Pr
DVI OUTPUT
GREEN/Y BLUE/Pb H SYNC V SYNC
RS-232 OPTION RS-232 CONTROL
17