Getting to know your meter and finger pricker
Activating or deactivating functions
Some functions, e.g. the beep tones and flagging
results, can only be activated or deactivated.
38
You can recognize these functions by the fact that
there is either a tick
or a checkbox
them and the command above the
or On (if there is a different command this means that
the function can also be modified).
A tick
means that the function is activated. The
command for the
button is Off to allow you to
deactivate the function.
Press the
button (Off) to deactivate the activated
function.
A checkbox
means that the function is deactivated.
The command for the
to activate the function.
Press the
button (On) to activate a deactivated
function.
in front of
button is Off
button is On to allow you