Questions And Answers - JVC HR-XVC29UJ Instructions Manual

84
EN
PLAYBACK
Q. What happens if the end of the tape is reached
during playback or search?
A. The tape is automatically rewound to the
beginning.
Q. During search, slow, still and frame-by-frame
playback, I can't hear any audio. What's the
problem?
A. This is normal.
Q. Can the unit indefinitely remain in the still
mode?
A. No. It stops automatically after 5 minutes to
protect the heads.
Q. When returning from search to normal
playback, the picture is disturbed. Should I be
concerned about this?
A. No, it is normal.
Q. Noise bar appear during search. What's the
problem?
A. This is normal.
Q. Sometimes, during Index Search, the unit can't
find the program I want to see. Why not?
A. There may be index codes too close together.
RECORDING
Q. When I pause and then resume a recording, the
end of the recording before the pause is
overlapped by the beginning of the
continuation of recording. Why does this
happen?
A. This is normal. It reduces distortion at the pause
and resume points.
Q. Can the unit indefinitely remain in the Record-
Pause mode?
A. No. The unit goes to its Stop mode
automatically after 5 minutes to protect the
heads.
Q. What happens if the tape runs out during
recording?
A. The unit stops recording, and " " and "$" on
the front display panel won't stop blinking.

QUESTIONS AND ANSWERS

TIMER RECORDING
Q. " " and "#" remain lit on the front display
panel. Is there a problem?
A. No. This is a normal condition for a timer
recording in progress.
Q. Can I program the timer while I'm watching a
tape or a TV broadcast?
A. You won't see the picture as it is replaced by the
on-screen menu, but the audio from the
program or tape you're viewing can be heard.