Using The Bluetooth Cellular Phone - JVC EXAD KD-AVX77 Instructions Manual

Using the Bluetooth cellular phone

To make a call, use <Dial Menu>. (
When a call comes in...
The source is changed to " Bluetooth" automatically.
Name and phone number (if
acquired)
When <Auto Answer> is activated...
The unit answers the incoming call automatically.
( 31)
When <Auto Answer> is deactivated...
To answer the incoming call
Touch the message displayed on the touch panel.
To end the call
Hold the message displayed on the touch panel.
• You can adjust the microphone volume,
Answering a waiting call
If your cellular phone is equipped with the call waiting
function, you can put the current call on hold and
answer the waiting call.
Touch any button on the touch panel (except volume
+/– buttons).
• To restore the on-hold call, touch any button on the
touch panel (except volume +/– buttons) again.
• When you end one call, you can connect to the other.
Switching conversation media (the unit/
29)
cellular phone)
During a phone call conversation...
Then, continue your conversation using the selected
media.
When a Text message comes in...
If the cellular phone is compatible with Text message,
the unit tells you a message has been received.
( 31)
32.
To read a received message, operate the cellular
phone after stopping the car in a safe place.
• You cannot read, edit, or send a message through
the unit.
Each time you press the
button, the conversation
media alternates between the
unit ( ) and cellular phone
( ).
Continued on the next page
EXTERNAL DEVICES 47