Connecting Two Vcrs For Tape Editing - Sony TRINITRON KV-36FS13H Service Manual

Installing the TV

Connecting Two VCRs for Tape Editing

VCR (playback)
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
A/V cable
18
If you connect two VCR's together, so you can record from one to the
other, you may want to monitor the recording process. You can
connect the recording VCR into your TV and then view what is being
recorded. The procedure below shows you how to do this.
1
Using an A/V cable, connect the playback VCR's Audio and
Video OUT jacks to the recording VCR's Audio and Video IN
jacks.
2
Using an A/V cable, connect the recording VCR's Audio and
Video OUT jacks to the TV's Audio and Video IN jacks.
To change the video input of the VCR.
See your VCR's user's guide for instructions.
To view what is being recorded
Use the remote control to set the TV to the video input that the
recording VCR is connected to. (VIDEO 1 in the illustration
above.)
If the VCRs you are connecting have S VIDEO jacks, you can use S VIDEO
cables to improve picture quality, replace the yellow video cable of the
combination A/V cable with the S VIDEO cable. (Do not connect both types of
cable at the same time.) You will still need audio cables for sound.
VCR (recording)
A/V cable
TV