Connecting A Satellite Receiver With A Vcr - Sony TRINITRON KV-36FS13H Service Manual

Installing the TV

Connecting a Satellite Receiver with a VCR

Satellite antenna
cable
Satellite receiver
VCR
22
1
Connect the satellite antenna cable to the satellite receiver's
SATELLITE IN jack.
2
Connect the CATV cable to the VCR's VHF/UHF IN jack.
3
Using a coaxial cable, connect the VCR's OUT jack to the TV's
VHF/UHF jack.
4
Using an A/V cable, connect the satellite receiver's Audio and
Video OUT jacks to the VCR's Audio and Video IN jacks.
5
Using an A/V cable, connect the VCR's Audio and Video OUT
jacks to the TV's Audio and Video IN jacks.
CATV
Coaxial
cable
Coaxial
cable
A/V cable
If the satellite receiver and VCR have S VIDEO jacks, you can use an S VIDEO
cable to improve picture quality, replace the yellow video cable of each
combination A/V cable with the S VIDEO cable. (Do not connect both types of
cable at the same time.) You will still need audio cables for sound.
TV
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)