Selecting A Radio Channel; Sending A Call; Making A Selective Call - Motorola CM360 User Manual

Selecting a Radio Channel

Your radio offers up to 100 channels (CM360), 10
channels (CM340), however some may not be
programmed. Check with your dealer for more information.
G
Press to increment the Channel number or
decrement it.
Using a Memory Channel button
A programmable button may be pre-programmed by your
dealer as a Memory Channel button, allowing you quick
access to a frequently used channel. A press of the button
will take you to the assigned channel.
Using the Microphone Keypad (CM360)
(If programmed)
Enter the desired channel number on the keypad.
Press # on the keypad or a short press on
only) selects the channel.

Sending a Call

1. Select the desired radio channel.
2. Press the PTT button and speak clearly into the
microphone.Your mouth should be 2.5 to 5 cm away
H
to
from the microphone.
3. When transmitting, the red indicator will light
continuously.
4. Release the PTT button to listen.
Your radio may be configured for 'Transmit Inhibit' under
certain conditions (e.g. when the channel is in use by
others) in which case, the channel busy tone will sound
when you press the PTT or call button to indicate that
transmission is inhibited.

Making a Selective Call

You can make a selective call to a particular radio, known
C
(CM360
as an individual call, or a group of radios, known as a
group call.
You can make calls by using the Contact List, the Missed
Calls List or Manual Dialling (using the keypad
microphone).
English
9