Getting Started; Turning The Radio On-Off; Adjusting The Volume; Radio On Message (Cm360) - Motorola CM360 User Manual

GETTING STARTED

Turning the Radio On/Off
Volume Control Knob
ON
OFF
ON
Rotate the On/Off/
Volume Control knob
clockwise until you hear
a click.

Adjusting the Volume

Turn the On/Off/Volume Control knob clockwise to
increase the volume, or counterclockwise to decrease the
volume.
English 8
OFF
Rotate the On/Off/
Volume Control knob
counterclockwise until you
hear a click. The display
clears and the LED
indicators turn off.

Radio On Message (CM360)

At power up the radio may display a message customised
by your dealer, e.g.:
RADIO ON
After this text has been displayed, the radio performs a self
test routine. During the routine the Green LED lights. On
completion of a successful self test the radio produces the
Self-Test pass Tone, the Green LED indicator goes out
and the display shows the channel that was in use at
power down, typically:
CHAN 35
This may be a number or an alias and will be the current
channel.
Radio On Indication (CM340)
At power up the radio performs a self test routine. During
the routine the Green LED lights. On completion of a
successful self test the radio produces the Self-Test pass
Tone, the Green LED indicator goes out and the display
shows the Channel that was in use at power down.
If the radio fails the power up routine the power up fail tone
sounds and the error number is displayed.
Note: If your radio fails the self test routine, record the
error number and consult your dealer.