Programming The Amount: Setting The Portion Sizes; Programming The Amount Of Espresso, Coffee, Hot Milk And Milk Froth Via The Ok Sensor - Miele CVA 5065 Operating And Installation Instructions

Programming the amount: setting the portion sizes

The flavour of the coffee produced
depends on the type of coffee, how
finely the beans are ground and the
quantity of water used. Not all espresso
and coffee cups are the same size. To
ensure the machine uses the right
amount of water to suit your taste and
your cups, you can programme the
amount to use.
With milky drinks the proportions of
espresso, milk and milk froth are
important for the taste. These
proportions can be set for cappuccino
and latte macchiato.
You can programme the amount in two
ways, either by touching the OK sensor
continually, or via the "Settings" option.
If a User profile has been activated,
the proportions for this particular
User profile will be set.
If you wish to set the proportions for
all of the User profiles, select the
"Standard" user profile.
40
Programming the amount of
espresso, coffee, hot milk and
milk froth via the OK sensor
^ Place the appropriate cup for the
amount you want to programme
under the spouts.
^ Select the type of drink you require.
^ Touch the OK sensor until "Prog. the
amount" appears in the display.
^ When sufficient liquid has flowed into
the cup touch the OK sensor again.
"Save" will then appear in the display.
The volumes of water or milk
programmed in will now be dispensed
every time that particular drink is
selected.
Water flow stops automatically when
the maximum amount possible is
reached. The maximum amount
possible for that type of drink will be
saved.
If there is insufficient water or milk in
the water container or milk flask, the
process will be stopped and the
amount will not be saved.