Setting The Timer - Miele CVA 5065 Operating And Installation Instructions

Setting the timer

^ Select "Settings F" from the main
menu, and then touch the OK sensor.
Settings
Timer
Coffee jug
^ Touch the right arrow sensor until
"Timer" is highlighted and touch the
OK sensor.
^ Select "Set" with the arrow sensors
and touch the OK sensor.
There are three options:
Switch on at:
You can choose a time for the coffee
machine to switch on automatically,
e.g. in the morning for breakfast.
^ Select "Switch on at" with the arrow
sensors and touch the OK sensor.
^ First set the hour with one of the
arrow sensors. Touch the OK sensor.
^ Then use the arrow sensors to set the
minutes. Touch the OK sensor.
If you activate the timer, the coffee
machine will switch on every day at the
time you have set (see "Activate").
Settings: Customising your machine
If Automatic rinsing is set to "On", the
machine will automatically carry out
a brief rinse when it switches itself
on.
If the System lock is activated, the
machine will not switch itself on at
the pre-set time.
If the machine has switched itself on
automatically 3 times and no drinks
or hot water have been dispensed,
the machine will not switch itself on
again automatically. The
programmed times will, however,
remain in memory and will be
reactivated after manually switching
the machine on again. This prevents
the machine switching itself on
unnecessarily, for example whilst
you are away on holiday, and you
have not cancelled the automatic
switching on procedure.
Switch off after:
To save energy, the machine can be
set to switch off automatically by
selecting the "Switch off after" option. A
time of between 15 minutes to 9 hours
can be set. This time is measured from
the last time a drink was dispensed.
^ Select "Switch off after" with the arrow
For example, 1:00 means that the
machine will switch off after 1 hour.
sensors and touch the OK sensor.
29