Download Print this page

Miele CVA 4062 Installation Instructions Manual page 4

Built-in coffee machines
Hide thumbs


Do not let the cord hang over the
edge of a table or counter, or touch hot
Do not operate any appliance with a
damaged cord or plug, or after the
appliance malfunctions or has been
damaged in any manner. Contact
Always attach the cord to the
appliance first, then plug it into the wall
outlet. To disconnect, turn the machine
off, then remove the plug from the wall
Never open the outer casing of the
appliance. Tampering with electrical
connections or components and
mechanical parts is dangerous and
may cause machine damage.
If installed in combination with
another appliance, a protective base
must be installed between the coffee
system and the appliance.
Install or locate this appliance only
in accordance with the provided
installation instructions.
Caution! Do not look directly or with
an optical instrument into the
lighting - laser radiation.
Caution! Risk of burns when
dispensing hot beverages, they are
extremely hot.
Before the first use, flush the supply
lines for water and milk and thoroughly
clean the coffee system and
stainless-steel milk container.
Only fill the water tank with cold,
fresh tap water. Warm or hot water, or
any other liquids may damage the
machine. The water should be changed
daily to prevent bacteria or mold
Do not use deionized or mineral
water. They may lead to heavy calcium
built-up in the machine that can
damage the unit.
Do not put anything but coffee
beans into the beans container. Do not
put ground coffee in the beans
container, it will damage the grinding
Do not fill anything but ground
coffee or a cleaning tablet (for the brew
unit) in the funnel for ground coffee,
otherwise it will get damaged.
Only use plain milk. Flavored milk
products contain substances that can
clog the coffee system.



  Related Manuals for Miele CVA 4062