Download Print this page

Frigidaire Oslo OWF-1/0303 Instructions & Operating Manual page 5

Wall mount color changing led fireplace
Hide thumbs


remove from the outlet.
26. This fireplace is intended for supplemental heat and / or decorative purposes. Continuous
use for several hours can impact the performance and life of the fireplace.
27. It is not intended to be used in commercial, industrial or agricultural settings.
28. Do not use outdoors.
29. Do not shorten or change the shape of the bracket.
Getting Started
Remove the fireplace from the box.
Remove the packaging. Place it inside the box or safely dispose elsewhere.
Package Contents
Electric Fireplace
Wall Mount Bracket
Screws and Screw Anchors
Pebble Pack
Remote Control (Requires 2 x AAA Batteries – Not Included)
Instruction Manual
Dual heat settings (750Watts / 1500Watts)
Realistic color changing LED flames with 10 different colors to choose from
Auto color changing mode built-in
Flames operate with & without heat with adjustable flame brightness
Black, heat resistant, tempered flat glass panel
Built-in overheating protection, auto safety shut-off
Quick Reference Guide
Prior to installation, please ensure that the voltage and capacity of your power outlet is
compatible with your fireplace.
Your fireplace may emit a slight, harmless odor during its first use. This odor is a normal
reaction caused by the initial heating of internal fireplace parts and it will not occur again.
It is normal for fireplace to make a rattling sound for a short duration of time during its
first use.
If your fireplace does not emit heat, please ensure the fireplace switch is on. For further
information, please refer to the Troubleshooting section of this manual.



  Related Manuals for Frigidaire Oslo OWF-1/0303