Remote Config; Input Select - Panasonic BT-LH1800p Operating Instructions Manual

How To Use On Screen Menu

REMOTE CONFIG

[REMOTE CONFIG]
>GPI1
GPI2
GPI3
GPI4
GPI5
GPI6
GPI7
GPI8
REMOTE CONFIG menu
With REMOTE CONFIG selected, the following menu will
appear.
GPI1–GPI8
Used to set the pin assignment of REMOTE control terminal.
The settable items are same for each terminal.
For each function of set-value, refer to the "REMOTE specifi-
cations."
Set-value (underlined is default value)
UNDEF
MARKER1 ON/OFF
MARKER2 ON/OFF
MARKER HALF* 1)
MARKER BLACK* 1)
INPUT SEL A
INPUT SEL B
INPUT SEL S
INPUT SEL OP
SD ASPECT* 2)
3)
HD ZOOM*
BACKLIGHT OFF
* 1) MARKER HALF and MARKER BLACK are effective only when
MARKER1 and MARKER2 are used with 4:3/13:9/14:9 displayed.
2)
* When using SD ASPECT, set SD ASPECT to REMOTE by VIDEO
CONFIG menu.
* 3) When using HD ZOOM, set HD ZOOM to REMOTE by VIDEO
CONFIG menu. HD ZOOM is effective only in case of 1080I, 1035I,
720P signal input.
8
UNDEF
UNDEF
UNDEF
UNDEF
UNDEF
UNDEF
UNDEF
UNDEF
With INPUT SELECT selected, the following menu will ap-
pear.
LINE A, B/S-VIDEO
Used to set the input format of LINE A, B/S-VIDEO.
Set-value (underlined is default value)
NON-STANDARD
Used to display a signal not in conformity with the broadcast-
ing standard in selection of LINE A, LINE B, S-VIDEO.
Set-value (underlined is default value)
_ HD SDI input unit installed [BT-YA300P]
HD-SDI
Used to set the input format of HD-SDI.
Set-value (underlined is default value)
1)
*
2)
*
* 3)

INPUT SELECT

[INPUT SELECT]
>[LINE A,B/S-VIDEO]
NON-STANDARD
INPUT SELECT menu
AUTO NTSC PAL
OFF ON
Menu for option unit is further added for each
type of option unit fitted on the rear panel.
[INPUT SELECT]
>[LINE A,B/S-VIDEO]
NON-STANDARD
[HD-SDI]
INPUT SELECT HD-SDI menu
1)
AUTO 1080/60I* 1080/50I
1080/24psF* 2) 1035/60I*
720/60P* 3)
1080/60I and 1035/60I are different with respect to the display
size and the matrix used.
Select 1080/60I and 1035/60I even in case of 1080/59.94I and
1035/59.94I signal input.
The status will be correctly displayed on the screen.
Select 1080/24psF even in case of 1080/23.98psF signal input.
The status will be correctly displayed on the screen.
Select 720/60P even in case of 720/59.94P signal input.
The status will be correctly displayed on the screen.
AUTO
OFF
AUTO
OFF
AUTO
1)