Table of Contents
Advertisement
Adjusting the Call Volume
During a call, to adjust the earpiece volume, use the Volume
keys on the left side of the phone.
Press the Up volume key to increase the volume level
and press the Down volume key to decrease the volume
level.
– or –
Quickly add more volume to the incoming audio by
tapping the on-screen Extra volume button
From the Home screen, you can also adjust the ringer volume
using these same keys.
In-Call Options
During an active call there are several functions available by
tapping a corresponding on-screen button.
•
Hold: place the current active call on hold.
•
Add call: displays the dialer so you can call another person.
•
Keypad: displays the on-screen keypad, where you can enter
number using DTMF (Dual Tone Multi-Frequency).
•
End call: terminates the call.
•
Speaker: routes the phone's audio through either the speaker or
through the earpiece.
–
Tap Speaker to route the audio through the speaker. (You can
adjust the speaker volume using the volume keys.) A green line
will appear under the Speaker button.
–
Tap Speaker again to use the phone's earpiece (see "Using the
Speakerphone During an Active Call" on page 53). The
green line will disappear when Speaker is not activated.
•
Mute/Unmute turn the onboard microphone either on or off.
–
Tap Mute during a call to mute the microphone. A green line will
appear under the Mute button.
–
Tap Mute again to unmute the microphone. The green line will
disappear when Mute is not activated.
•
Headset connects to a Bluetooth headset.
–
Tap Headset during a call to activate a Bluetooth headset. A
green line will appear under the Headset button.
–
Tap Headset again to de-activate the Bluetooth headset. The
green line will disappear when the Headset is not activated.
•
Press
for more options:
–
Contacts: allows you to go to your Contact list.
–
Memo: allows you to write a memo.
–
Message: allows you to write a message during a call.
Call Functions
50
Advertisement
Table of Contents
