1. Manuals
  2. Brands
  3. Hunt Electronic Manuals
  4. DVR
  5. HVRM-HD400H
  6. Install & user's manual

Hunt Electronic HVRM-HD400H Install & User's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Install&User's Guide
HVRM-HD400H
Install & User's Guide
(v 1.0)
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HVRM-HD400H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Hunt Electronic HVRM-HD400H

Summary of Contents for Hunt Electronic HVRM-HD400H

  • Page 1 Install&User’s Guide HVRM-HD400H Install & User’s Guide (v 1.0)

  • Page 2: Introduction

    Install&User’s Guide Introduction Thank you for purchasing a Hunt digital video recorder. This manual is for HVRM-HD400H. Before product installation and operation, please become thoroughly familiar with this user manual and other manuals referenced by this manual. This user manual and the software and hardware described here are protected by copyright law.
  • Page 3 Install&User’s Guide fire or theft. We take no responsibility for damage from any incident. Caution As this equipment undergone EMC registration and suitable for business purpose, distributors and users are aware of this point. FCC Compliance Statement Caution : Any changes or modifications in construction of this device which are not expressly approved the party responsible for compliance could void the user's authority to operate the equipment.

  • Page 4: Important Notice

    Install&User’s Guide Important Notice 1. Do not place heavy objects on the top of the product. 2. This equipment is indoor use and all the communication wiring are limited to inside of the building 3. Product is for indoor use. It is not weatherproof. Use product with referring to its environmental specifications (Temperature &...
  • Page 5 Install&User’s Guide B) Reduced Air Flow - Installation of the equipment in a rack should be such that the amount of air flow required for safe operation of the equipment is not compromised. C) Mechanical Loading - Mounting of the equipment in the rack should be such that a hazardous condition is not achieved due to uneven mechanical loading.

  • Page 6: Table Of Contents

    Install&User’s Guide Contents INTRODUCTION ..................1 KEY FEATURES ..................10 INSTALL MANUAL ................13 FEATURE ..................13 Supplied Accessories ......................13 Description & Function ........................14 1.2.1 Front ................................ 14 1.2.2 Rear ................................16 1.2.3 REMOTE CONTROLLER ........................17 INSTALLATION ................... 19 Installation and Connection ....................
  • Page 7 Install&User’s Guide USER MANUAL ................... 50 3.MENU USAGE .................. 50 Menu Structure ........................50 Function Menu ........................50 Factory Reset ........................51 4. MONITORING ................56 Basic Screen ........................56 Single Full Screen Mode ....................56 Multi Screen Mode ......................56 Screen Description ......................
  • Page 8 Install&User’s Guide 5. PLAYBACK ..................64 Playback Mode ........................64 5.1.1 Playback on Standard monitor ..................... 64 5.1.2 Playback function ..........................64 SEARCH MODE ........................65 5.2.1 Time Search ............................65 5.2.2 Schedule Search ..........................65 5.2.3 Event Search ............................66 5.2.4 Thumbnail Search ..........................
  • Page 9 Install&User’s Guide Event Setup .......................... 99 6.5.1 Event Check ............................99 6.5.2 Sync Event ............................100 6.5.3 Motion Detection ..........................106 6.5.4 Sensor ..............................106 6.5.5 Preset ..............................107 Recording setup ........................ 108 6.6.1 Program setup ..........................108 6.6.2 Manual/Schedule recording setup.................... 109 7.
  • Page 10 Install&User’s Guide 9.7.4 Backup ..............................124 9.7.5 Web Monitor ............................. 125 9.7.6 Channel On/Off ..........................125 9.7.7 Saving time & Checking Rec, Capacify ................... 125 9.7.8 Searching Calander ......................... 126 9.7.9 Functional function at the button of monitor ..............126 10 JAVA VIEWER ................

  • Page 11: Key Features

    Install&User’s Guide KEY FEATURES HD-SDI This product can transfer HD (High-Definition) signal image using HD-SDI technology via coax cable. Please be noted that this product doesn’t accept SD signal. The supportable resolution is below. SMPTE 296M : 1280x720p 30/60Hz SMPTE 274M : 1920x1080p 30Hz Monitoring Screen Supports real live video with high resolution per each channel and variable display mode.
  • Page 12 Install&User’s Guide 1280 x 720(720P) : 120ips Supports manual & schedule recording Video loss detection Supports archiving event list (Sensor, Video loss, Motion detection, T ext) Available record Max 5 seconds before triggering an event per each cha nnel Search / Playback It supports variable and convenient functions for search &...
  • Page 13 Install&User’s Guide quad screen) Available to playback, recording, search and DVR management thru. network viewer in PC Available to record, search & playback by time from remote site. Supprots 10/100Mbps Ethernet/xDSL Multiple DVR connection Supports User friendly GUI and mouse function Supports User friendly GUI and mouse function Easy and simple firmware upgrade thru.

  • Page 14: Install Manual

    Install&User’s Guide Install Manual 1. Feature Supplied Accessories Unpack and check all the items as below AC Cord, Remote control, Setup CD, HDD Fixing Screw, Rack Mount...

  • Page 15: Description & Function

    Install&User’s Guide Description & Function 1.2.1 Front Category Function DVD-Multi Back up use for recorded data by DVD/CD media Back up Jog / shuttle Playback direction change and speed control select single channel with illuminating of relevant Touch Panel switch channel LED channel LED To start and stop recording...
  • Page 16 Install&User’s Guide Copy To run copy mode. Relay To run and pause Relay action by manual. Expands live/playback screen ZOOM Sequence To run or stop user sequence. Multi To change DVISION in live or playback mode. ■(STOP) To stop replay in playback mode. ◀l(SREW) To move to reverse direction by one frame ◀◀(REW)

  • Page 17: Rear

    Install&User’s Guide 1.2.2 Rear 번호 입출력 단자명 기능 Power connector Socket for AC100V~AC240V power cord. Sensor IN Input for external sensor. Relay Relay Connection terminal. Com2,3 For RS-485 RS-485 Termination RS-485 Termination Switch Ground Ground between DVR & external device. CH1~4 BNC input for camera connection Audio input(RCA)

  • Page 18: Remote Controller

    Install&User’s Guide 1.2.3 REMOTE CONTROLLER It is available to use all functions of DVR. If several DVR are set with unique ID numbers, they can be controlled with one remote controller. To use remote controller, it is necessary to set ID first which want use. Keep pressing ID button repeatedly (Up to Max. 16 times) and use it matching DVR &...
  • Page 19 Install&User’s Guide MULTI To change division ZOOM To run digital zoom SEARCH To indicate search menu CHANNEL BUTTON To select channel SELECT Not use In case of selecting over 10 (+10 + 1) MON(Action Zoom) To run digital zoom To start/stop recording MENU Covert to menu screen HELP...

  • Page 20: Installation

    Install&User’s Guide Installation Installation and Connection 2.1.1 Connecting & Running 2.1.1.1 Connecting camera Connect CCTV camera to DVR with BNC cable as below. Please make sure to connect standard camera following HD-SDI rule. (HD-SDI) 2.1.1.1 Connecting monitor Connect CCTV monitor to DVR with HDMI cable as below.

  • Page 21: Connecting Audio

    Install&User’s Guide 2.1.1.2 Connecting Audio Connect audio signal to DVR with using RCA cable or D-SUB as below. 2.1.1.3 Supplying Power Connect power cable as below. - When supplying power, DVR starts booting automatically. - In order to cut off power, press power switch on DVR front during 5 seconds, then select “YES”...

  • Page 22: Running Osd Menu

    Install&User’s Guide Running OSD menu 2.2.1 OSD menu configuration Press [MENU] in keypad of front or Click in [Main Menu] in Function menu to open configuration menu as below. Main Sub Menu Configuration Window (1) Main Menu : The selected tab is show in bright color and the related sub-menu will be shown left- below the tab.

  • Page 23: Setting Remote Controller

    Install&User’s Guide bomber. Keep pressing [▲/▼], [ / ] arrow button until the word is looking for and press [Enter] or click the mouse. In case of deleting input word press [ ], spacing words press [ ] button. To exit from dialogue box, press [Enter] or click [Enter] button by mouse after finishing word input.

  • Page 24: Installation Examples

    Install&User’s Guide 2.2.2.2 Setting ID If several DVRs are with unique ID numbers, they can be controlled with one remote controller. To select a specific DVR, keep pressing the ID button of remote controller until a buzzer sounds during 2 seconds. 2.2.2.3 Operable range of remote controller 2.2.2.4 Loading the batteries into the remote controller Remote controller required two AAA-type batteries.

  • Page 25: Advanced Configuration

    Install&User’s Guide 2.2.3.2 Advanced configuration Connect camera, monitor, audio, sensor, relay etc.

  • Page 26: Basic Setting

    Install&User’s Guide 2.2.3.3 External storage & back up configuration Use USB for back up. 2.2.3.4 Internet / Intranet configuration 2.2.4 Basic Setting 2.2.4.1 Viewing Image When power is on, eDVR starts automatically and displayed in basic 4ch-split screen after booting. <Reference>...
  • Page 27 Install&User’s Guide If user password is set, a prompt for entering the password will be appeared. Factory default is reserved as not responding keypad on DVR front (It is not from factory default). 2.2.4.2 Setting Date & Time - Press [MENU] button and select “System” when OSD menu is appeared. - Select “Date/Time”...
  • Page 28 Install&User’s Guide not applied for daylight saving then this option will be turn to OFF, and additionally the user can configure the daylight saving option manually for the counties that were not applied, and in this case, you can use “Custom” option to set. The second is for selecting a month, week, and day to define the start and end times of DST.

  • Page 29: Record Setting

    Install&User’s Guide TIME (1) Select “Time” using [ / ] or [▲/▼] arrow button and press [Enter] button. (2) Select Date, Time using [ / ] arrow button and set value using [▲/▼] arrow button. (3) Press [ESC] after finishing value setting. APPLY Most setting values are applied automatically, when exiting form the related menu page.
  • Page 30 Install&User’s Guide Schedule Setting Set the recording schedule by each channel that user want record in “Program” of record menu. Set recording mode as “Schedule & Event” and set by date/ time. Program Setting Please setup resolution, frame rate, picture quality of connected camera per channel in “Program menu”...
  • Page 31 Install&User’s Guide <Reference> If recording setting is finished correctly, “REC LED” in front is flickering. In addition, it is marked [SCHEDULE] indicating that all channels are recording.

  • Page 32: Connecting And Configuring Dio Ports

    Install&User’s Guide Connecting and configuring DIO ports 2.3.1 Wire Handlin When connecting a wire to a terminal block, follow the instruction below. Not the different type of wire that can be used - Standard wire : Pie off the wiring cover 8~10mm and solder it. Wire gage should AWG 22~26.
  • Page 33 Install&User’s Guide 2.3.3.1 Specification In order to run sensor input DVR normally, the following conditions are required. Input Ch 4EA Transistor input Input type N.C, N.O supprt Spec Supported sensor Dry contact sensor Way of connecting Connecting the trimmed wire to terminal block Available input Minimum 500ms pulse range...
  • Page 34 Install&User’s Guide All Sensor It is used when setting for all sensors and set Off, or Normal Open (N.O.) / Normal Close (N.C.) type. (1) Select All and set type. Each sensor It is used when setting for each sensor and set selecting each sensor. (1) Select sensor and press [Enter] button.

  • Page 35: Connecting Serial Port

    Install&User’s Guide Connecting relay out Connect R1 ~ R4 with referring to the following images, it shows to connect a warning light. Please refer the “Wire Handling” Relay setting It is available to run relay selecting from sensor, motion detection, Text, Video Loss which is normal event source and Disk error, Disk full, Fan error, authentication fail, WRS registration fail, Mirroring fail, abnormal Recording stop which is system event source.
  • Page 36 Install&User’s Guide Please refer the “Wire Handling”. Serial communication port diagram COM1 connection diagram (RS-232 – D-Sub) Text Keyboard Com1 Transparent COM2/COM3 diagram (RS-485)
  • Page 37 Install&User’s Guide Available PTZ is as below Model Manufacturer Webgate Keyboard KBD300A, WGI SPD1800/2600 Webgate WKC-100 Keyboard Pelco PELCO(P), PELCO(D) Bosch BOSCH AutoDome, TC8560X-4 Sony Sony EVI-D3x VT VPT-4x AD SpeedDome Sungjin SungJin SJ372R1 Samsung Electric Samsung SCC641 Panasonic Panasonic WV-CS850 SDZ160/330, Samsung SPD, Samsung Techwin Keyboard SCC3000A, Samsung SRX-100B...
  • Page 38 Install&User’s Guide Dongyang Unitech HTC-230S RVision Elbex Elbex Honeywell 755/655, HRX-2000, HTX-3000, Honeywell ScanDome2 VIDO VIDO Vicon VICON Hunt Hunt Sysmenia ORX-1000 LiveEye Fine CRR-1600 Tokina Tokina Kodicom Kodicom KRE Nuvico Nuvico Serial Setting You can set up at ‘serial’ menu under Device menu.

  • Page 39: Connection To External Device Via Serial Port

    Install&User’s Guide From serial setting, you can set protocol, port, baud rate, parity bit, stop bit and data bit. After completed serial setting, select desired channel from camera menu, and setting up PTZ Home, PTZ Idle Time, PTZ Port, and PTZ address. 2.3.3.4 Connection to external device via Serial port Text input device connection (ATM / POS / Access Control) Using COM1/RS232, TEXT DATA can be recorded with synchronizing POS/ATM.

  • Page 40: Usb Device Connection

    Install&User’s Guide Serial (COM1) Setup (1) OSD Select “Device” in OSD menu and move to sub menu. (2) Selecting COM1 and configure “Text”in Device (3) Setup the value of Baud Rate/Parity/Stop bit/Data bit with the device. Text Setup (1) Select “Deice” on OSD, and move to sub menu. (2) Select “Text”and configure relevant text information.
  • Page 41 Install&User’s Guide same as below. USB Spec. Ver 2.0 USB Memory Stick Supported device types Output voltage/current Max. 200mA per DC 5V / Port <Reference> It should be formatted by FAT32. In case of normal connection, if executing Copy menu, disk will be recognized same as Below and Set copy range Select Drive Execute Copy...
  • Page 42 Install&User’s Guide [RE4 Copy] Select the channel to copy. Standard setting is selecting all channels [AVI Copy] <Reference> A USB Flash memory which should install additional program on Windows OS, cannot be recognized.

  • Page 43: Hdd

    Install&User’s Guide 2.3.3.6 Video In/Out connection DVR receives HD-SDI Video signal (SMPTE 292M). The resolution of Video input signal will be selected automatically. 2.3.3.7 Audio In/Out connection There are 4 RCA Audio Input and 1 RCA output. 2.3.4 HDD Please, ask to distributor or manufacturer for available HDD list. 2.3.4.1 HDD registration and format After mounting HDD and booting system, “Disk Manager”...

  • Page 44: Hdd Replacement

    Install&User’s Guide (1) Press [Enter] button in “Disk Manager” (2) Using [▲/▼] Key, select new HDD(Displayed [No] on Enabled item) and press [Enter]. (3) If you see the message for format, select [Yes]. (4) Press [ESC] and escape from “Disk Manager. 2.3.4.2 HDD Replacement (1) Turn Off the DVR and take off the HDD that has a problem and replace it with new HDD.

  • Page 45: Remote Monitor And Control

    Install&User’s Guide format/Nevertheless, do you want format this disk?” and select “NO” for re-use without format, and select “YES” for format. 2.3.5 Remote monitor and control Via Internet/Intranet, in remote site, user can access with PC. 2.3.5.1 Ethernet connectio (1) Cut power (2) Connect Ethernet cable to DVR and Hub.

  • Page 46: Network Configuration

    Install&User’s Guide 2.3.5.2 Network Configuration. Ethernet Set type as Ethernet and input IP, Netmask, Gateway, DNS. The way to input is using directional key or mouse wheel. PPPoE Set type xDSL, and move to xDSL menu. First, change Ethernet Port Please, input ID and Password for PPPoE.

  • Page 47: External Device Connection

    Install&User’s Guide 2.3.6 External device connection DVR has external Storage Device Interface and 1 ea of eSATA port. Using eSATA port, user can expand Storage capacity up to 8TB. <Note> Since some of eSATA device cannot be compatible with DVR, before the usage, please, contact the seller and check its compatibility in advance.

  • Page 48: Nvs04 Connection

    Install&User’s Guide <Note> Basically eSATA is connected to DVR while DVR is running, works properly. However it depends on eSATA manufacturer. Therefore, we recommend below order for making connection. Power off DVR Connect external eSATA storage with power-off C. Power on DVR D.
  • Page 49 Install&User’s Guide 2.3.7.2 Set ID Configuration Set ID using Rotary Switch located on the back. This ID is used as IP Address of NVS04R and the form of IP address is 10.10.20.XXX. When the user connect more than 2 units of NVS04R, each ID should be set differently.
  • Page 50 Install&User’s Guide 1) It takes around 1 minute to connect NVS04R and DVR after connecting power. Four LEDs at the front starts blinking and they are fully on when connection is completed. The HDD list is available to check at Disk Manager 2) User needs to install firmware for NVS04 separately.

  • Page 51: User Manual

    Install&User’s Guide User Manual 3.Menu Usage Menu Structure The menu structure will be shown like below image, and each menu setting method descried from chapter 4 to chapter 6. Function Menu To run Function menu, please, click the right button of mouse in live monitoring or playback status or push “Func”...

  • Page 52: Factory Reset

    Install&User’s Guide Function menu in playback screen Factory Reset In order to reset value to factory value, go to System Setting->System->Setting, and once press Factory Reset then the warning message will be appear, click “Yes” to reset the DVR value to factory.
  • Page 53 Install&User’s Guide Block Recording Disk Manager >> Disk Status >> Disk Mirroring Disk Replace >> HDD Temp Alarm User Setup Check : X DVR Alias DVR0 Language English DVR Keyboard ID Remote Controller Utility Firmware Update >> System Log >> Factory Reset >>...
  • Page 54 Install&User’s Guide Status xDSL not connected Interval www.webgateinc.com Group Newbie Status Not Registered Status Disable Radius IP Address 0.0.0.0 Port 1812 Device Camera Camera Number Status Name Cam 1 Input Resolution Current Resolution Encoding Resolution 720p PTZ Home Idle Time PTZ Port None PTZ Address...
  • Page 55 Install&User’s Guide Header 1 Header1 Header 2 Header2 Delimiter 0D0A Timeout(ms) 1000 Lines Serial Port Com1 Device None Interface RS232 Serial Baud Rate 9600 Parity Bit None Stop Bit Data Bit Event Event Check Always Event Action Relay1 Action Duration 10 Sec Event Normal...
  • Page 56 Install&User’s Guide Event Input Res 720p30 Rec. Res 720p Frame Rate All 15 Quality All Q5 Initialization setting value of program Rec. Mode Normal Event 항목 Rec. Res Rec. Res 720p 720p 720p 720p 720p 720p 720p 720p 720p 720p 720p 720p 720p...

  • Page 57: Monitoring

    Install&User’s Guide 4. Monitoring All analog video image channels connected to DVR is displayed to screen by Power connection. It is to utilize all monitoring mode of DVR. Basic Screen After Power connection, the DVR operates on automate. It boots with LED on. Single Full Screen Mode After press the channel number wanted or click mouse button.

  • Page 58: Auto Switch Mode (Sequence)

    Install&User’s Guide Auto Switch Mode (Sequence) Defined channels or multi screens can be displayed in sequence with configured time interval. Maximum 4 channels or multi screens can be defined. 4.5.1 System Standard Mode By [SEQ] button, it can monitor auto switching of defined channels. Press [MENU] for the setting switching term or using mouse click menu icon from function menu.

  • Page 59: Event Screen

    Install&User’s Guide Event Screen When the event is occurred, the green color [M] and red color [S] will be display from status bar. In case of [M] displayed, the camera name will be turned to green color, and it will turn to yellow when Motion Detection event finish.

  • Page 60: Zoom Screen Mode

    Install&User’s Guide If Alarm pop-up set to Off, Event pop-up is not activated If Alarm pop-up set to Keep, it keeps showing pop-up image until user press any button. To return to previous screen, please press any button. Zoom Screen Mode From single full screen mode, press [FUNC] and D-Zoom button then select + button to activate zooming the image.

  • Page 61: Ptz Control

    Install&User’s Guide PTZ Control Connect PTZ controller to DVR and set relevant protocol from “Serial” menu, then PTZ can operate while monitoring live images. To operate PTZ, change the screen to relevant single mode which is connected with PTZ. Then PTZ works automatically with following icon. PAN/TILT can be used with directional button on front panel, and PAN/TILT/ZOOM can be used with mouse.
  • Page 62 Install&User’s Guide VT VPT-4x AD SpeedDome SungJin SungJin SJ372R1 Samsung Electric Samsung SCC641 Panasonic Panasonic WV-CS850 SDZ160/330, Samsung SPD, Samsung Techwin Keyboard SCC3000A, Samsung SRX-100B LG GAC-PT2 Honeywell Keyboard KBD300A, WGI SPD1800/2600 Honeywell WKC-100 Merit Merit-Lilin FastDome Elmo Elmo PTC200C Canon Canon VC-C4 DongYang Unitech...

  • Page 63: Pan/Tilt/Zoom

    Install&User’s Guide Hunt Hunt Sysmenia ORX-1000 LiveEye Fine CRR-1600 Tokina Tokina Kodicom Kodicom KRE Nuvico Nuvico 4.9.1 Pan/Tilt/Zoom This menu is used to control Pan / Tilt / Zoom function. Select relevant channel to control PTZ which is connected with PTZ. 4.9.2 Focus Press [PTZ] button in PTZ screen to activate Focus menu.

  • Page 64: Auxiliary On

    Install&User’s Guide 4.9.5 Auxiliary On Press [PTZ] button in PTZ screen to activate Aux On menu. Using up / down button or mouse wheel to select the Aux Number. Select On and press Enter button or click from mouse. (Aux function is available to max 16 functions.) 4.9.6 Auxiliary Off Press [PTZ] button in PTZ screen to activate Aux Off menu.

  • Page 65: Playback

    Install&User’s Guide 5. Playback Playback Mode 5.1.1 Playback on Standard monitor Please, push play button in monitoring mode or mouse click play button in Function menu. If pushing Play button or FWD button, video playbacks in forward direction at 1× speed. If pushing REW button, video playbacks in reverse direction at 1×...

  • Page 66: Search Mode

    Install&User’s Guide Jog/Shuttle : changeable to various playback speeds (x1, x2, x4, x8, x16, x32, x64, x1/2) with either playback direction in playback status. SEARCH MODE This menu is to playback specific time data from the time frame and searching log at Playback mode.

  • Page 67: Event Search

    Install&User’s Guide Display recording status of channel 1~4ch : Select Year to search. With mouse wheel, user can change it. Year : Select Month to search. With mouse wheel, user can change it. Month : Select Date to search. With mouse, select the date and decide the Date time by wheel.

  • Page 68: Thumbnail Search

    Install&User’s Guide : Input end date and time for search with direction button and push Search end Time Enter and change the value by Up and Down button. With mouse, click and scroll the wheel. Event Channel : Select the channel for search 1 ~ 4ch can be selectable.

  • Page 69: Copy

    Install&User’s Guide : Play back from the selected video of thumbnail search result. Select video With pressing Enter or clicking mouse, use can play back. After Thumbnail search, following result is displayed Select one of them to playback the relevant recorded data Copy This is for copying recorded video.
  • Page 70 Install&User’s Guide : Select CD/DVD using up-down direction key or mouse wheel. Press Type Enter and scroll wheel to change the value. : User can select some or all channel among 4 channels. Select the Channel channel location and press Enter or use mouse wheel. : Select start date and time to copy using up-down key or mouse From wheel.

  • Page 71: Re4

    Install&User’s Guide 5.3.2 User can back up by HDD, USB memory and play back suing mini-player or Control Center. Select channel position and press Enter or use mouse wheel to open the channel list like below : Select RE4 using up-down button or mouse wheel. Type : To pop up the channel selection window, press Enter or use mouse Channel...

  • Page 72: Avi

    Install&User’s Guide 5.3.3 Use USB memory or HDD to copy certain part. : Select AVI using up-down key or mouse wheel. Type : Select the channel to copy by up-down key or mouse wheel. Channel : Set start date and time to copy. Time and Year by left/right button and From date/time by up/down button.

  • Page 73: Configuration

    Install&User’s Guide 6. Configuration Recording Structure There are 3 modes in DVR recording. Configuration relation structure is like below. Please, refer to the below each item for detailed recording configuration. Recording Event Recording Schedule Recording Manual Recording System Setup Time and Disk and authority can be configured. 6.2.1 Date/Time Time set should be configured prior to the recording.

  • Page 74: Time Setup

    Install&User’s Guide Time configuration is very important to protect the recording data. Time change on recording is not recommended. Time zone configuration value of factory default is “UTC 00:00 Dublin” 6.2.1.1 Time Setup Caution: under recording, if user changes Time, it will affect time change on previously Recorded video data in accordance with.

  • Page 75: Ntp Setup

    Install&User’s Guide Date format With using left/right direction key or mouse wheel, configure date among “MM/DD/YYYY”, “YYYY/MM/DD”, “DD/MM/YYYY”. Time With left/right direction key, use can move to year, month, day, hour in order and each configuration will be controlled by up/down key or mouse wheel. Apply User must push “Apple Date/Time”...

  • Page 76: Disk

    Install&User’s Guide Sync NTP Set NTP function on/off. NTP Mode Configure NTP mode of DVR – Client / Server / All NTP Server Loc. When NTP mode is client, it is on Enable. Configure yes or no wither NTP server is in Local Network or Public.
  • Page 77 Install&User’s Guide Over Write(Auto Deletion) If there is no space in HDD, old data will be deleted automatically. Disk Full Alarm Warning It gives notice if the recorded data is full up to configured limitation of all HDD dis ks which is connected to DVR. Block Playback This function makes recording data seen during the limited area.

  • Page 78: Disk Manager

    Install&User’s Guide 6.2.2.1 Disk Manager This is menu for the management of internal or external HDD. Manage status, bad block, size, Yes or No etc. : display location or type of disk. Type Int A (Internal A HDD), Int B (Internal B HDD), Ext (External HDD) : HDD model name.

  • Page 79: Disk Status

    Install&User’s Guide - HDD is not used. 6.2.2.2 Disk Status Temperature and status of HDD will be shown. 6.2.2.3 Disk Mirroring This DVR has DVR Mirroring function in itself and NVS Mirroring on NVS(Network Video Storage) via Gigabit Network Without additional user control, if connecting DVR and NVS via Gigabit Network Cable, Mirroring function will be activated and user can operate it easily and simply.
  • Page 80 Install&User’s Guide □ NVS recording 32TB (Mirroring 16TB) will be supported soon. DVR Mirroring working method (1) Basically HDDs will be set like the above. (2) Recording data of HDD-3 is mirroring with HDD-1 and recording data of HDD-4 is mirroring to HDD-2.
  • Page 81 Install&User’s Guide Mirroring configuration - Off : All mounted HDD will be recorded in order without Mirroring. - DVR : Mirroring recording only with internally mounted HDD ( not HDD in NVS04R) - NVS : Mirroring recording only with HDD in NVS04R which is connected to DVR. (not HDD in DVR) - All : Mirroring recording with all HDDs in DVR and NVS04R.
  • Page 82 Install&User’s Guide <Note> 1. For Mirroring function, HDDs capacity and model for Recording and Mirroring should be same. If not, it won’t work. But, in case that HDD capacity is same but just different model, sometimes, it cannot work properly. Ex) Example for normal Mirroring and abnormal Mirroring 1) Normal Mirroring case Type...

  • Page 83: Mirroring Hdd Replacement

    Install&User’s Guide IEEE1394, USB). 3. For Mirroring configuration in NVS04R or DVR, other HDDs should not be added except its Mirroring configuration. Ex) For NVS04R Mirroring configuration, all HDDs in DVR should be [NO] status. Recording Configuration. When using Mirroring function, according to configuration option, DVR system performance will be down and due to this reason, recording configuration Will be adjusted automatically like below table chart.

  • Page 84: User Setup

    Install&User’s Guide 1. For Mirroring HDD replacement, user must do it in HDD Change menu. 2. This time, HDD for replacement should be same model and capacity with the original HDD. 3. If user does not replace Mirroring HDD after replacement popup message – 0%, System will delete the oldest data in sequence and keep Mirroring.
  • Page 85 Install&User’s Guide <Reference> Admin Password is “12345” in factory default and from user 1 to 10 in order “11111”,”22222”, and user10 is “00000”. In case of 9 channel DVR user, press “0” for figure 0, in case of 16 channel, press button “10” Password change Select user Input password and press change...

  • Page 86: Utility

    Install&User’s Guide [Authority check] [Password error] 6.2.4 Utility Configure the name of DVR, remote controller ID, Language DVR Alias Set the name of DVR. DVR Keyboard ID This menu is to set the address of keyboard when using all functions of DVR by keyboard. Factory default is “1”.
  • Page 87 Install&User’s Guide Registration order for Remote controller. Make remote controller direction to DVR. Press ID button and figure in accordance with configured remote controller ID. If IDs are matched correctly, DVR buzzes. Use Remote controller. Language Select Language to use. Firmware Update Can update firmware by USB Memory.
  • Page 88 Install&User’s Guide Factory Reset Change all configuration value by factory default. Config Import/Export Export – Save Configuration data in DVR to USB Import – Apply exported Configuration data to relevant DVR or another DVR. System Information Display recording status and system configuration of DVR...

  • Page 89: Network

    Install&User’s Guide Caution : This function is allowed only for system administrator. Network This is menu for configuring network Type Configure type of Network (Ethernet/xDSL). If connected to cable modem or Lan directly to DVR, configure by “Ethernet”. If DVR connects to xDSL- one of PPPoE type, configure xDSL. But if it is not type of PPPoE, configure ‘Ethernet’.

  • Page 90: Xdsl

    Install&User’s Guide Net Mask makes range of IP address available. It should be received from network administrator. Gateway Gateway is necessary to communicate IP, it should be received from network administrator. DNS Server DNS1 is mandatory item to regist and use WRS and it should be asked to network administrator. UPnP Port Forwarding It configures port of DVR automatically when DVR is used with internet hub.

  • Page 91: Wrs

    Install&User’s Guide User ID/Password Configure user ID and Password. Status It shows connection status of DVR. 6.3.2 WRS If DVR is connected to Cable modem or xDSL modem, IP address is changed at every connection to ISP. In this case, changed IP address cannot be known. If DVR using static IP register into WRS server, changed IP address can be known easily when it connects to DVR.
  • Page 92 Install&User’s Guide To set Radius, Status, IP Address, Port should be set. Set ‘Enable’ the status to use Radius and enter ‘Radius Server IP’ to IP Address. Standard port to use is 1812 and specific port number which is from Server is also useable. ‘User ID’, Password’...

  • Page 93: Device Setup

    Install&User’s Guide Device Setup This menu is for configuring each camera connected to DVR. There are [name] [Status] [Color/black or white] [Brightness] [Contrast] [PTZ] etc. Configured value will be applied to monitoring and search at the same. 6.4.1 Camera Setup Select the camera to configure in Channel menu.

  • Page 94: Monitor Setup

    Install&User’s Guide shown. Use directional key for text input. With mouse, just click the text. Select the text using up/down and left/right button. After selecting the text, press [Enter]. To delete the text, press [ ] button. To make a space between letters, press [ 6.4.1.3 Input Resolution This shows resolution of camera connected with DVR and user can’t change this.

  • Page 95: Audio Setup

    Install&User’s Guide Standard monitor is available to use all functions from DVR. Alarm Popup If specific channel uses MD, Sensor Input, it makes the relevant channel popups as single or multi screen. To use this function, event should be set to ‘Always’ or ‘Custom’ and MD / Sensor configuration should be done also.
  • Page 96 Install&User’s Guide Voice Channel Select audio to use Recording Configure yes or no of using audio recording. If no, audio will be out only in live view and if yes, Audio will be out in both view modes Synchronize Video Channel Configure which channel is matched with the input audio.

  • Page 97: Text Setup

    Install&User’s Guide Select audio in live view. If setting by “Mix On”, all input audio will be out in every channels and if configured certain channel, input audio will be out on the selected channel only 6.4.4 Text Setup Configure Text in Device menu. Recording Set On/Off of recording against Text input Sync Text with...

  • Page 98: Serial Setup

    Install&User’s Guide Header check It has the various type of data input from the external device (Access Control, POS, ATM etc) but it’s not necessary for a device which is supported its protocol by DVR .Like VSI Pro, VSI Pro Hydra, and Star Finger 007, it is not needed when the protocol of these device have implemented on the device.

  • Page 99: Ptz Setup

    Install&User’s Guide Serial Port Select Serial port. Device Select the connected device. Interface Configure which interface user uses. COM1 is for RS-232C, COM2 and COM3 is for RS-485 Baud rate/Parity/Stop Bit/Data Bit In put suitable value according to external device. 6.4.5.1 PTZ Setup Additional configuration for PTZ Address, Port PTZ.

  • Page 100: Event Setup

    Install&User’s Guide Shift to preset assigned if it has no movement in certain time while PTZ control. PTZ Idle Time If it has no movement during configured time, shift to PTZ Home. PTZ Port Select Port for PTZ PTZ Address Configure the address configured in PTZ.

  • Page 101: Sync Event

    Install&User’s Guide • INDEX : Schedule configuration from 1 to 50 • Weekday • Time • Delete : delete INDEX How to configure If configuring INDEX,weekday,time, they are displayed on the table. If clicking and selecting start time and end time of recording on the table, Index,weekday,time will be shown on the table.
  • Page 102 Install&User’s Guide Event Action There are 7 actions – relay 1 to 4, buzz, E-Mail, FTP Action Duration Action Duration runs if relay and buzz are configured, and goes on during the configured time. E-mail works by configured time interval. Normal Event Source User can configure Sensor, motion detection, V-loss, Text.
  • Page 103 Install&User’s Guide System Event source can configure Bad block, Disk full, Fan error, authorization failure, WRS registration failure, Mirroring failure, Abnormal recording stop. E-mail address Input E-mail address to get event alarm by E-Mail. E-mail address Please fill E-mail address with receiver’s E-mail address. Input mail format should be xxxx@xxxxxx.xxx and user needs to use only English and number to compose E-mail address.
  • Page 104 Install&User’s Guide Including Picture In general event, when sensor, MD, V-loss events are generated, the event information and Channel video will be sent to e-mail together. But system event just send system event information. FTP sending It send 1 video image of event to FTP server when event is occurring. FTP Uploading It makes FTP function On or Off.
  • Page 105 Install&User’s Guide User ID Enter the relevant ID when FTP server authentication is set. Password Enter the password FTP Directory Select Folder to save image If folder is not indicated, the image is sent to the folder which server selects. Twitter connection Twitter can be connected to send single image or text message about event information of the channel when event is triggered on the channel...
  • Page 106 Install&User’s Guide Twitter ID Type in Twitter account to be used Logging Status It shows current log in status Include DVR Alias This is setup if DVR sends DVR name together with event status information to twitter address. Including Picture This is setup if DVR sends recorded image in image file together when DVR transfer event status information to twitter address.

  • Page 107: Motion Detection

    Install&User’s Guide 6.5.3 Motion Detection The Motion detection can be used to notify user of detected motion on each channel or all channel. Channel All or certain channel. Sensitivity Sensitivity can be configured from min.1 to max 10. Area Select detection area. User can select all or certain channel.

  • Page 108: Preset

    Install&User’s Guide 6.5.5 Preset In PTZ function, make configured preset work according to sensor input. Please, configure preset per PTZ. After selecting channel in preset menu, select event to work preset. Event can select sensor, MD, Text, its preset can be configured up to 16...

  • Page 109: Recording Setup

    Install&User’s Guide Recording setup There are 3 mode for recording – schedule recording, manual recording, event recording. Schedule recording records according to the configured schedule. And manual recording records via pushing “REC” button and event recording records when events are on. 6.6.1 Program setup Using [Program], adjust frame rate and quality configure recording program for Manual&Event&Schedule.

  • Page 110: Manual/Schedule Recording Setup

    Install&User’s Guide DVR records in 720p when 720p60 inputted to DVR as well as recording in 720p will be possible when 1080p30 inputted to DVR. F (FPS) It means frame per second and can select 1 to 30fps per second. Max. Frame can be changed according to the configuration.

  • Page 111: Schedule Setup

    Install&User’s Guide 6.6.2.2 Schedule Setup It records according to the programmed schedule automatically. Make recording mode Schedule & Event and configure day and time. Check and select each program default value and select one of 9 programs from A to I or Several programs.

  • Page 112: Event Recording Setup

    Install&User’s Guide If selecting recording start time and end time on the table by mouse, its Index,weekday,program will be displayed. Deletion Select INDEX and click Delete button. If clicking delete button without INDEX, previously selected INDEX will be deleted first and after that, from the largest INDEX in order.
  • Page 113 Install&User’s Guide Reference : Please, check below to configure event recording. 1. Select one of Manual&Event, Schedule&Event. 2. In program configuration, set frame rate by 0 fps in general mode and only configure Event frame rate. 3. Set Event applying time. Event Time configuration Configure time for event recording and there are 3 mode –...
  • Page 114 Install&User’s Guide that, from the largest INDEX in order. Edition Select INDEX to edit, and change the values. In case of being configured by INDEX 50, click and select time to eidt and i f clicking the time table again, previous configuartion will disappear and new configuration will be shown.

  • Page 115: Web Viewer

    Install&User’s Guide 7. Web Viewer WebViewer is Web application program loaded to monitor real-time image or to monitor the images recorded through Web browser to PC located remotely. WebViewer is divided into Login page and Monitor to do monitoring real-time images, Playback to replay recorded images.

  • Page 116: Login

    Install&User’s Guide Login After input IP address that set to system, then WebViewer Login page will be connected. Input the set of User ID & Password, click ‘LOGIN’ to access. If didn’t change the password in Control Center, ID and Password will be admin/12345. ID cannot be changed.

  • Page 117: Browser Available

    Install&User’s Guide Basic admin password is “12345” and user password is like “11111{“, “22222” ~~, user10 is “00000”. Valid password is 5 digit. Authority configuration is almost all the same in DVR and Control Center. But quick recording, backup, audio, yes or no of using channel are only possible in Control Center. Browser available WebViewer is optimized to Windows Internet Explorer 6.0 or higher in PC for smooth use.

  • Page 118: Monitor

    Install&User’s Guide Login page provides manual installation program to use WebViewer function. PC that access to WebViewer first installs ActiveX to use WebViewer’s function. At this time when installation is not smooth, installation program needs to download from Login Page and install manually.

  • Page 119: Move To Playback

    Install&User’s Guide Double click on one of the playback screen to convert in 1 channel mode After conversion to 1channel mode, double click on screen to return to previous division channels. At division screen, it can change screen location. If 3channel image moves to 1ch, drag 3ch image and drop on 1ch location so as to exchange between 3ch and 1ch image 9.6.2 Move to Playback...

  • Page 120: Channel On/Off

    Install&User’s Guide 9.6.3 Channel On/Off It is On/Off button for the Channel located to left in page. Click the channel wanted to On or Off. And Default is On. 9.6.4 Sensor Indication The icon indicates when sensor occurs in system. When it sensors, relevant sensor icon comes to Red, and indicates sensor number of video.

  • Page 121: Event Data

    Install&User’s Guide when click the button for the use Mic. 9.6.7 Event Data It shows real time event data occurred at the bottom of monitoring page. Indicated Event data list are as follow. (Table, Event Icon) Icon Function Motion Detect On Sensor Input Relay Output On No Video, Video Detected...

  • Page 122: Using Ptz

    Install&User’s Guide Saved recording file is saved into “*.re4” file format. re4 file can playback through Control Center Playback program or Mini Player program. 9.6.8.2 Saving Vido There are 3 types for saving Video - jpg, bmp, eye, saving means the function to record 1 frame of current monitoring channel.

  • Page 123: Using Audio

    Install&User’s Guide bar at left of image, left slide bar can control Focus. Move to Preset In case of Preset set, Mouse on image press right button for pop-up menu and “Goto Preset” is indicated additionally. When select Preset list, it moves to Preset position selected. Preset should be set up by user in advance.

  • Page 124: Monitor

    Install&User’s Guide Cancel for disconnection of image monitoring by click ‘Close’ at top right on screen, then it comes to black screen. To reconnect the channel disconnected, it can reconnect relevant channel using ‘Channel On/Off’ menu. Monitor This page is to playback recorded images, and user who has authority of ‘HDD’ among user ID or administrator can use this function.

  • Page 125: Print

    Install&User’s Guide It can save playback image to BMP file. Click mouse to channel to save. Dotted line will be surrounding to the selected channel, and click ‘Save’ button. Save Iamge dialog box appears, then it can input message or select channel name, date, event data.

  • Page 126: Web Monitor

    Install&User’s Guide 9.7.5 Web Monitor Click ‘Go’ button at top of page, and it can move Web monitor page. 9.7.6 Channel On/Off It is the same function like Channel On/Off function at Web Monitor. It is Channel On/Off button located on right of Page, and click On or Off page for wanted channel.

  • Page 127: Searching Calander

    Install&User’s Guide 9.7.8 Searching Calander Recorded date is abled in black color, and others unrecorded date disabled in grey. Select button after select date & time so as to playback images on the date & time selected. ‘When click ‘Go To’ button, it indicates for 24hours from the time selected at left bottom. As above picture, it is possible to change the time zone with ‘24h’...

  • Page 128: Java Viewer

    Install&User’s Guide 10 JAVA Viewer Java viewer is a web viewer to use in Java. Java should be installed in login screen to use Java viewer. After an installation of Java manually, select “Java” in below of Password window and login. Then single screen of video channel 1 is displayed...
  • Page 129 Install&User’s Guide Multi screen display, Event, Relay can be used in Java viewer. To change Multi screen display, click 1,4,8,16 in right side...

  • Page 130: User Manual For Mobile Viewer

    Install&User’s Guide 9. User manual for Mobile Viewer Mobile viewer is viewer service to monitor video via mobile device. To access mobile viewer, user uses mobile device supporting Wi-Fi or smart phone or 3G. 9.1 Log-In page Below picture is Mobile viewer log-in page. To access log-in page via mobile viewer, please, type the address like http://IP/mvmenu.html.

  • Page 131: Monitoring Page

    Install&User’s Guide 9.2Monitoring page This is the page on Log In. It shows selected channel video and functions right below the screen. For functions, please, refer to the below. [0] MENU : Move to Log In page [1] CH- : Move to the previous channel. [2] UP : Move to upside of Pan Tilt movement [3] WIDE : Zoom Out action : Move to left side of Pan Tile movement...

  • Page 132: Trouble Shooting

    Install&User’s Guide Trouble shooting 1. DVR booting failure 1. Check the power 2. Check Power cord 2. No video on monitor 3. Check monitor power 4. Check cable between DVR and monitor 5. Check monitor cable port 6. Check DVR power is off 7.
  • Page 133 Install&User’s Guide 24. Check Screen Lock 9. If network is not working 25. Check if Network cable is connected 26. Check DVR IP 27. Check Computer IP 28. Ping Test 29. Check PC specification if Webviewer video is not shown. 10.

  • Page 134: Check The Manufacturing Date

    The example of verifying manufacturing date using serial number The below S/N can be verified as following as: 『 T40111031303 』 (1) “T4” means “HVRM-HD400H”. (2) “01” means internal management number. (2) “1103” means it was produced on “March of 2011 year”.

  • Page 135: Available Hdd

    Install&User’s Guide (3) “1303” means serial number. Available HDD Please ask to seller about HDD available with DVR. Compatible CD/DVD list DVD-R manufacturer CD-R Manufacturer Mitsubishi(×16 recommended) Mitsubishi(×52 recommended) TDK(×16 recommended) TDK(×52 recommended) Imation(×16 recommended) Imation(×52 recommended) Sony(×16 recommended) Sony(×48 recommended) Product Specification Video input Video input standard...
  • Page 136 Install&User’s Guide Mode Instant playback / Search Speed 60 fps at 1080p 120 fps at 720p Search Type Time, Calendar, Event, Thumbnail Block Playback 24 hours ~ 31days Event & Alarm Event source MD, Sensor, Text Event check schedule 24hrs / 7day Event Action Recording, Relay,...
  • Page 137 Install&User’s Guide User privilege Menu, PTZ, Relay, PB, Power on/off, Backup IP Filtering supported Storage/Backup Storage Devices 4 internal SATA HDDs, 1 external eSATA I/F, 10/100/1000 Ethernet for Storage File System Proprietary file system, data-loss protection against power-failure Capacity Max 16TB with SATA, Max 64TB with cascaded NVS04R Backup type multi-channel or single channel avi file...

  • Page 138: Product Dimension

    Install&User’s Guide Product Dimension...
  • Page 139 Install&User’s Guide HUNT ELECTRONIC USA INC. 11790 Jersey Blvd. Rancho Cucamonga, CA 91730 Tel: (888)993-4868, (909)987-6999 Fax: (909)987-6997 techsupport@huntcctv.com www.huntcctv.com...

Table of Contents